Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
-
15th December 2005, 08:17 PM #1
What was this old vice used for ?
I'll start another thread.
I bought this vice at an auction a while back. Loved the look of it. Thinking maybe could mount it on my bench somewhere. Still haven't really descided where or even if I should. It doesn't have any holes in it that indicate it was bolted to a bench. So, I'm thinking maybe it was used for something else.
On the static face side there's a rebate that runs its length. Thinking for a boy cut to fit in there somewhere. But what ? Can see this rebate in this picture.
On the flip side its interesting. Cause the faces chamfers up together at 45,,,,, to aid access to your work maybe ? I thought, this probably would help when sawing something. So you can rock the saw better....maybe...but then, despite its obvious wear, there arn't any saw marks. Which mean't the guy was very careful or it wasn't used this way (for sawing that is)
Around each screw I've got a little strip of black tape. I just put the strips over the top of holes that held a small piece of dowel. Engages the skrew and makes it work. (obviously ) ...see, without the tape the dowel would just drop out.
Anyway, a bit of history would be nice, before I start drilling holes in it :eek: . Hate to mess with something rare. Possibly wasn't even used for woodworking. Leather work ????.....it binds very well though.....any ideas ?
Thanks.
-
15th December 2005 08:17 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
15th December 2005, 08:59 PM #2
Gday Jake, could it be a vice for sharpening hand saws?
Thought this may explain the jaw shape, bit excessive though if for this purpose, don't know much about handsaw sharpening but you don't drop the file handle THAT much do you? :confused:
I can see why it appeals to you though, looks kinda cool
What are the "dog" looking bits above the wooden threads on the body?
Cheers................Sean, free of vices
The beatings will continue until morale improves.
-
15th December 2005, 11:32 PM #3
Hi Jake,
That is a nice looking vice, built for a special purpose. I wonder if its something for bookbinding?
Cheers,Andy Mac
Change is inevitable, growth is optional.
-
16th December 2005, 12:17 AM #4
methinks its a bookbinding press. googled the term and came up with some similar looking tools. Wish i owned it. Noice pickup.
If you never made a mistake, you never made anything!
-
16th December 2005, 12:30 AM #5GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 3,157
I think you'll find its a bookbinder's vise or clamp - I don't know enough to tell you its exact purpose with authority, but it looks like it was used to clamp the free ends of the pages before they were planed & gilded.
The rebate was probably to allow it to be in turn held in a larger vise at the bench - the binder would have had several clamps with books in them & would plane each book when bound one at a time, then gild them in a batch while still in their individual clamps - when you undid the clamp you would never get all the pages quite in the same alignment, so the gilding would not go on smoothly. Doing it in a batch would save the trouble of making several batches of size & glue, then throwing the batch out after doing one book (egg white, hide glue etc)
-
16th December 2005, 04:38 AM #6Originally Posted by bsrlee
Thanks everyone for your input. I don't bind books. Question is ...what do I do with it now. Really want to work wood off it.
-
16th December 2005, 09:03 PM #7GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 3,157
My old metal work teacher used a home made one to bind sketching pads - just put a bit of gladwrap over the jaws, stack a bunch of pages together, clamp up & spread a bit of PVA along the spine. An hour or so later, you remove your new sketch pad.
Handy for making note pads, shopping list pads etc from all those nearly blank bits of paper you get when printing out some web pages. You can even ake oyur own personalized stationery or gifts.
It would also be handy for some types of leatherwork/saddlery.
Remember - paper is just highly processed trees.
-
17th December 2005, 06:39 AM #8Originally Posted by bsrlee
I'm so tempted to attach it to the bench somewhere. Love it for dovetailing, or edge planing a long piece..
-
27th December 2005, 06:48 PM #9
Bit late, but just received this reply from a friend who was a printer/bookbinder.
This larger bench press is used by bookbinders mainly when finishing books - the book is placed in the press with the spine or back of the book facing up the gold work is then applied using gold foil or hand design lettering or fancy tooling this is applied by heating brass tools the reason for the cut away is to obviously give you easier access to the work with to the book edges.
I think someone has customised the back slot section to control slipping on the bench the metal end rods could be adapted to turn the press into a backing press this is where the shoulder on a book is formed and special plates would be used to form the shoulder - looks original to me
I used these presses at the Gov Printing office and they are still used by hand binders today - there are smaller versions about half this size that are used in book work to hold the book when you work on them - stripping off old spines and to apply new back binding.
-
27th December 2005, 06:59 PM #10
Thanks Alex. Thats convinced me not to modify it. I might try and give it to someones whos into book binding. Somebody who'd appreciate it.
Jake.
-
22nd February 2021, 09:12 PM #11GOLD MEMBER
- Join Date
- Oct 2002
- Location
- NSW
- Posts
- 1,610
I know I'm 16 years late to this party, but as my daughter's just become interested in bookbinding, I can say that the rebate is used to guide a "book plough", which is a blade used to cut all the pages to the same length.
The vice is used chamfer-side up to work on the spine, and chamfer-side down to trim the pages.
Similar Threads
-
Installing a Record vice
By AlanP in forum HAND TOOLS - UNPOWEREDReplies: 11Last Post: 31st January 2012, 02:35 PM -
Vice advice/opinion needed from neanderthals
By TassieKiwi in forum WOODWORK - GENERALReplies: 31Last Post: 13th January 2006, 10:56 PM -
Auxillary vice for small parts
By Andy Mac in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 3Last Post: 4th November 2005, 01:38 AM -
Tail vice retrofit
By ryanarcher in forum WOODWORK - GENERALReplies: 38Last Post: 24th June 2005, 05:26 PM -
Vice for this bench
By dazzler in forum HAND TOOLS - POWEREDReplies: 16Last Post: 19th June 2005, 09:45 PM