Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Vinyl or polyurethane bag
-
6th December 2023, 04:53 PM #1Senior Member
- Join Date
- Jul 2019
- Location
- Box Hill
- Age
- 66
- Posts
- 186
Vinyl or polyurethane bag
Hi, does any know where i can get bags made from either clear vinyl or clear polyurethane for a vacuum press.
So far my search has lead me overseas and not in Australia. Bag size is roughly 1380x 3000 to do table tops but smaller is fine and really I know just about zero on the subject other than polyurethane bags cost quite a bit more than vinyl bags. I should say welded on 3 sides
TIA.
-
6th December 2023 04:53 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
6th December 2023, 05:59 PM #2
I can't really help, but if nobody comes up with any suggestions, you could try contacting Nick Pedulla from Pedulla Studio. He makes extensive use of large vacuum bags for his work and is based in Sydney. Below is a video of his where he laminates and uses a vacuum press. (around the 7m+ mark for the bags.) From memory, this process is repeated several times during the video.
(26) Wood Isn't Supposed To Do This! - YouTube
My understanding is that increasingly he really only produces work for his videos as that is his revenue path more than the work itself. Consequently, he may well be keen to pass on a name if they are a sponsor.
Hopefully, somebody here will have a contact for you.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
6th December 2023, 06:34 PM #3
Sure. This is where I got mine:
TAP Kits and Bags - Roarockit Australia
-
6th December 2023, 07:31 PM #4Senior Member
- Join Date
- Jul 2019
- Location
- Box Hill
- Age
- 66
- Posts
- 186
Thanks for the tip.
-
6th December 2023, 10:26 PM #5China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
Have you tried PolyProducts in South Australia
-
8th December 2023, 06:10 AM #6SENIOR MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Posts
- 651
I got mine made up at Residential, Commercial & Industrial Tarps | Lidcombe, NSW in Sydney. And a fraction of the cost of the online ones. 1500mm(slightly under after edge glued) wide by any length you desire. Was a couple years ago but under $200 from memory for 1500mmm by 2000mm.
If your the Melbourne Box Hill maybe a similar place somewhere down there.
Similar Threads
-
vinyl art on cedar
By woodman12 in forum CNC MachinesReplies: 0Last Post: 31st January 2022, 05:22 AM -
Vinyl LPs
By Tonyz in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 12Last Post: 25th January 2021, 12:07 AM -
Polyurethane for end grain - on top of polyurethane
By rtyuiop in forum GLUEReplies: 8Last Post: 3rd March 2018, 06:32 AM -
Vinyl to Vinyl POOL glue
By bab600 in forum GLUEReplies: 3Last Post: 21st January 2013, 04:48 PM -
Polyurethane VS Vacuum Formed (vinyl thermal)
By infra-greg in forum FINISHINGReplies: 6Last Post: 25th March 2006, 05:28 PM