Thanks: 0
Needs Pictures: 0
Results 1 to 1 of 1
Thread: Wall Mounted Wine Rack
-
7th August 2019, 02:07 PM #1Novice
- Join Date
- May 2014
- Location
- Devonport, TAS
- Posts
- 15
Wall Mounted Wine Rack
Made from offcuts, mainly. I had a 720mm length of 235 x 19 DAR and always have 90mm lying around. Along with some 22 x 19, they pretty much auto-suggested a use for themselves: a six-bottle/six glass wine rack.
Measurements are 720 (L) x 235 (H) x 109 (D + 19mm for the rails). The gap between the two shelves is 19mm.
Cutting the slots in the bottom shelf for the wineglass stems, I marked 100mm centres 45mm back from the front edge, then used a 12mm spade bit to drill holes to suit my glass stems. I had to make a bevel by ‘lathing’ a taper on a 25mm dia pine cut-out held in my drill chuck with a bolt. Pasting 80 grit, then 240 onto my new recessing tool worked well to create the recesses for glass security. To effect the cutout slots, the shelves were marked with pencil lines then set on edge for careful cutting.
This is the almost finished rack, dry assembled, still to be dismantled and sanded ready for final wet assembly by the old chaps I work with at a nursing home.
-
7th August 2019 02:07 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Wall Mounted Lumber Rack
By Woodified in forum WOODWORK PICSReplies: 0Last Post: 26th February 2018, 03:44 AM -
Wall mounted towel rack
By Rod Gilbert in forum WOODWORK - GENERALReplies: 4Last Post: 18th September 2013, 10:11 PM -
Wine rack
By dj_pnevans in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 3Last Post: 11th May 2009, 09:16 PM -
wine rack
By timnruth in forum WOODWORK PICSReplies: 15Last Post: 13th June 2006, 12:02 AM