Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: need a wide bed sander in Sydney
-
25th April 2010, 06:49 PM #1
need a wide bed sander in Sydney
Can anyone suggest where I may be able to find a wide bed sander in Sydney where I can either sand some table tops or have it done for me?
I am making a series of drop side tables from Australian Red Cedar. I've thicknessed the slabs and cut the blanks oversize. The centre panels will be 540mm wide and the drop leaves 200 wide. They are currently 25 thick to be finally dressed to 22.
I can pretty much get to anywhere in Sydney and surrounds but south west or west would be the most convenient.
many thanks, fletty
ps, don't worry Ray the SECRET PROJECT is safe, the girls wont be able to read this thread, they're currently in Laos and were last heard holding their own ANZAC dawn service on the banks of the Mekong
-
25th April 2010 06:49 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
25th April 2010, 07:07 PM #2
-
25th April 2010, 07:45 PM #3
thanks Alex,
I'm at Camden so Bowral is a good call,
fletty
-
25th April 2010, 11:17 PM #4
I know Ryan at MWE sells them Major Woodworking Equipment
I'll ring him tomorrow and ask who to or maybe he'll let you do a test run
-
26th April 2010, 09:09 AM #5
-
26th April 2010, 11:15 AM #6Novice
- Join Date
- Mar 2010
- Location
- Sydney
- Posts
- 21
G'day I was making a coffee table last year for Year 11 and I had to get the top sanded. I used a Canalpie Fine Furniture and Timber at Tennyson, its near Richmond and he's got a wide belt sander you could use. His number is 0245711570.
-
26th April 2010, 01:01 PM #7
-
26th April 2010, 04:15 PM #8
thanx Jimdave ... and everybody else,
fletty
Similar Threads
-
wide belt sander
By Gaza in forum WOODWORK PICSReplies: 2Last Post: 15th January 2010, 06:03 PM -
Wide Belt Sander
By Gazza in forum HAND TOOLS - POWEREDReplies: 12Last Post: 26th December 2005, 08:49 AM -
Wide Drum Sander
By mikm in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 27Last Post: 6th August 2005, 11:14 AM -
How wide should a drum sander be.
By Sturdee in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 11Last Post: 1st May 2005, 04:46 PM