Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Wire brush attachments
-
6th July 2018, 11:03 PM #1GOLD MEMBER
- Join Date
- Jul 2011
- Location
- In between houses
- Posts
- 1,784
Wire brush attachments
Does anyone know what the best wirebrush drums are for cleaning up recycled old hardwood? I’ve seen a makita drum wheel sander on youtube, in the usa, but nobody seems to have any here, is there anything that goes on an angle grinder or a polisher?
-
6th July 2018 11:03 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th July 2018, 11:58 PM #2New Member
- Join Date
- Jul 2017
- Location
- Brisbane Australia
- Age
- 53
- Posts
- 3
How-to Use an Angle Grinder on Wood - LogFurnitureHowTo.comSome good info here mate
Sent from my RNE-L02 using Tapatalk
-
7th July 2018, 12:40 AM #3GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Something like this is what you're after; https://www.bunnings.com.au/josco-10...brush_p6326672
No need for any pressure as you'll take the soft wood out, would give an interesting effect though.
Not so aggressive is this; https://www.bunnings.com.au/flexovit...-disc_p6310279
Hope this helps,
KrynTo grow old is mandatory, growing up is optional.
-
7th July 2018, 09:27 AM #4.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,792
The Twistknot brushes are far too aggressive for , better are the crimped wheels of brushes.
But they all pale in comparison to the big brush type sanders.
Cant see any on the Makita.com.au site - n mac cannot see a 240V model anywhere.
Similar Threads
-
Looking for source of 200mm wire brush
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 23rd June 2018, 05:20 PM -
Paint Brush maintenance - wire brush and flea comb and a gong for Minwax Lacquer
By FenceFurniture in forum FINISHINGReplies: 5Last Post: 12th January 2015, 10:59 PM -
Rust removal from roofing - wire brush and pressure wash, or skip the brushing?
By FenceFurniture in forum METALWORK FORUMReplies: 25Last Post: 28th October 2014, 07:28 PM -
Need Help with Ideas on Hiding Wire in Teak Molding - Wire runs from Instruments
By breezin in forum BOX MAKINGReplies: 1Last Post: 19th August 2012, 05:49 PM