Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Woodcut Pro Form Flexi
-
15th August 2013, 11:55 AM #1New Member
- Join Date
- Mar 2011
- Location
- Bilambil Heights NSW
- Posts
- 8
Woodcut Pro Form Flexi
Hi all, I am looking to buy a hollowing tool for my lathe, I wonder if anyone has a Woodcut Pro Form Flexi and what they think of it? any dissussion would be great, thanks you.
-
15th August 2013 11:55 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
15th August 2013, 01:51 PM #2
Woodcut Pro-Forme Flexi Hollower
Linton the Woodcut Pro Forme flexi is suitable for your small to medium hollow forms if this is the area you are looking to do.
You mostly use the short link and try to keep the cutter in line with the bar.
You use the long link more for a deeper undercut on the lip. Again still keeping the tip in line with the bar.
This helps stoping the twisting action.Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
28th August 2013, 11:49 AM #3New Member
- Join Date
- Mar 2011
- Location
- Bilambil Heights NSW
- Posts
- 8
Woodcut Pro Form Flexi
Thank you Jim, I have a Mighty Midget Hollowing tool and find that it clogs up very easy, I was wondering how the Flexi stacks up, I have seen the video on your site about the Rolly Munro tool, mabee I am not doing it right!
-
28th August 2013, 10:27 PM #4
I got the Proforme Flexi (off Jim ) a few years ago and love it to bits Wouldn't bother with it on face grain (eg: bowls) because of clogging but it's the go-to tool for hollowing most woods to about 5 or 6" deep - rarely clogs at all!
-
10th September 2013, 02:48 PM #5New Member
- Join Date
- Mar 2011
- Location
- Bilambil Heights NSW
- Posts
- 8
flexi tool
Thank you for your info
Similar Threads
-
Flexi recommendations
By RedShirtGuy in forum DUST EXTRACTIONReplies: 5Last Post: 22nd January 2012, 02:20 PM -
woodcut bowl saver
By chuck1 in forum WOODTURNING - GENERALReplies: 12Last Post: 5th January 2012, 05:42 PM -
How Flexy is the Woodcut ProForme 1/2" Flexi
By rodjocumsen in forum WOODTURNING - GENERALReplies: 5Last Post: 21st April 2010, 02:26 PM -
Fisch Flexi Curve - Flexible guide
By BackOfShop in forum ROUTING FORUMReplies: 5Last Post: 5th March 2010, 04:07 PM -
woodcut printing??
By underfoot in forum WOODCARVING AND SCULPTUREReplies: 21Last Post: 3rd April 2008, 06:33 PM