Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Plans for 3-leaf clothes horse
-
10th February 2012, 12:38 AM #1New Member
- Join Date
- Feb 2012
- Location
- Canberra
- Posts
- 4
Plans for 3-leaf clothes horse
Hello. I am starting in a woodwork course next week to refresh my learnings after quite a break (more than five years) since I did anything with wood. I would like to make a 3-leaf clothes horse (for indoor use only) like the (2-leaf) one I found a picture of, but I can't find any plans on the web and am not sure what dimensions, wood to use etc. (It's not one of the more complicated concertina ones). I would like to make a really nice one (I have six weeks to do it in). Any advice you can give me would be great. Thanks.
-
10th February 2012 12:38 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th February 2012, 06:23 AM #2
The Airers like these I've seen were 3 frames like the ones you show held/hinged together with interwoven furniture webbing, so the sections can bend both ways.
Also by using the webbing, I'm assuming, it removes the metal hinges that could rust or tarnish and mar the clothes.Dragonfly
No-one suspects the dragonfly!
-
10th February 2012, 10:46 AM #3New Member
- Join Date
- Feb 2012
- Location
- Canberra
- Posts
- 4
-
10th February 2012, 10:13 PM #4
Make the width to fit the space you have. The height should be about chest height. If you have got the time and tools make the joints mortice and tenon.
Just my thoughts. Enjoy the project and the finished product.
-
12th February 2012, 09:23 AM #5New Member
- Join Date
- Feb 2012
- Location
- Canberra
- Posts
- 4
-
12th February 2012, 09:46 AM #6GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
timber, try tassie oak
In terms of timber to use, I'd suggest Tassie oak. Easily available (Bunnings), relatively inexpensive, straight grained, very few knots, easy to cut and work and not overly given to warping or splitting. Vic ash is roughly the same thing.
Beginners often use pine, but thats a bad choice. Because its soft and crushes easily its hard to get nice looking mortise and tenon joints. Also, the presence of knots makes it hard to plane and finish.
ArronApologies for unnoticed autocomplete errors.
-
13th February 2012, 11:40 AM #7New Member
- Join Date
- Feb 2012
- Location
- Canberra
- Posts
- 4
Arron
I am so please you suggested Tassie Oak as I love that wood (and I really don't like pine). I have some gorgeous bedroom furniture that I have had for nearly 30 years in Tassie Oak and it was what I was thinking of but I didn't really know if it would be suitable for the project. I didn't know it was available at Bunnings so I will be going there to get some. Thank you so much.
-
14th February 2012, 10:19 AM #8GOLD MEMBER
- Join Date
- May 2003
- Location
- Central Coast, NSW
- Posts
- 3,330
Well its stocked in Bunnings in Sydney - not so sure about Canberra
ArronApologies for unnoticed autocomplete errors.
Similar Threads
-
clothes drying rack plans?
By tea lady in forum WOODWORK - GENERALReplies: 12Last Post: 26th October 2011, 11:41 PM -
Needed - Plans for temp clothes rack
By barrysumpter in forum DESIGNS & PLANS FOR PROJECTSReplies: 3Last Post: 17th February 2009, 11:43 AM -
looking for butterfly leaf dining table woodworking plans!!
By thoughtfulmom in forum WOODWORK - GENERALReplies: 1Last Post: 2nd January 2007, 09:32 AM