Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
17th March 2012, 09:49 PM #1Senior Member
- Join Date
- May 2007
- Location
- Sydney
- Posts
- 145
Chris Hall's Carpentry Study Group - Second Project
If the relationship of these projects to carpentry (which after all pertains to the woodwork of built structures, in particular roofs) seems a little tenuous then bear with me as the projects will eventually progress to various roof models. At this stage we are merely exploring the geometrical relationships that occur in roofs via the expedient of another, simpler object. I suppose if you turn your hopper upside down it does look a little like a portion of a hip roof...
So if you remember, our last project dealt with determining three angles that would allow us to construct a hopper of a chosen slope. These three angles are the face cut and two different edge cuts depending on whether we wish the corners to meet as a but joint or a miter/mitre joint. The last project was nailed but if we were a pre iron-age society and didn't have the use of nails (but nevertheless could accurately mark and cut out our wooden parts with flint or bronze tools ) then we may wish to find a joinery solution that will hold our hopper together at the corners. The first cab off the rank will be a mortise/mortice and tenon joint here, but standard dovetail/finger joint options would also be available.
So the focus of study in this second project is determining the layout for the mortices in a sloped piece, when intersected by the tenon from another sloped piece. Now our tenons will be square in cross section (well rectangular but 90deg corners, you know what I mean) but when an orthogonal tenon intersects a plane at some slope to the tenon, the resulting 'hole' is no longer square but will be distorted so that a diamond or parallelogram results. The greater the slope, the greater the distortion, conversely as the slope more closely approximates 90 degrees or square, the less the distortion so that, obviously, in traditional box type carcase work, the mortice has the same shape as the tenon cross section.
In the following photo I have started to hollow out the mortice by first drilling with an auger bit, but hopefully the parallelogram shape of the mortice is apparent. Note that the mortice travels through the receiving board at an angle:
Attachment 201676
And here is the board with mortices complete:
Attachment 201677
I don't have a photo of the tenoned piece being completed but here is a photo showing the matching sides with cutout complete. Of course the lessons learnt from the first exercise have been retained - the surfaces apart from the mortice and tenon parts still need to be cut at the appropriate angle - the surfaces are butting together in the region of the mortice and tenon but for neatness, a mitred return has been added at the top of the hopper:
Attachment 201678
So how does it look when it's all together? Here is a photo of the mating parts coming together. Note the blood stains, part of my ritual sacrifice decorating every wooden joint:
Attachment 201681
And finally all together:
Attachment 201683
A close up of a corner:
Attachment 201684
The last addition to this project was to chamfer the bottom edges of the boards so that the bottom sits flush to the resting surface:
Attachment 201685
Actually the last thing needed is a floor panel so that this could serve its intended purpose as a fruit bowl but the next exciting project always beckons...
So at the completion of the second project in chris' course we have mastered some very useful concepts that allow us to have our sloping boards meet neatly at the corners and be connected by joinery. What now? Assuming that this hopper was the outer surface of some object and it required an internal frame of some sort - what special considerations may come in to play now? That is the focus of the project number three which arrives in the shape of a sawhorse. See you soon for project three in the series.
Regards
Derek
-
17th March 2012 09:49 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th March 2012, 09:48 AM #2planing away
- Join Date
- Nov 2011
- Location
- Vancouver
- Posts
- 26
Very nice work, and well documented! I'm pleased to see what functional models Chris has chosen to represent the progression of skills.
On a side note, turning on visible images in the forum control panel made viewing this post a lot more enjoyable.
Cheers
-
19th March 2012, 11:05 AM #3
The degree of difficulty is second to none. Well done sir.
Visit my website at www.myFineWoodWork.com
-
20th March 2012, 09:22 AM #4Senior Member
- Join Date
- May 2007
- Location
- Sydney
- Posts
- 145
Fissionchips,
Thanks for your comment, and I would think that the image settings would be dependent on individual user settings? The images display automatically for me when I open a thread.
Wongo,
Thankyou for your kind words but trust me I am no guru. The fact that I, working slowly and methodically, can complete these projects is testament to the fact that anyone can.
Regards
Derek
Similar Threads
-
Chris Hall's Carpentry Study Group - First Project
By Yxoc in forum JAPANESE HAND TOOLSReplies: 5Last Post: 2nd April 2012, 04:45 PM -
any one study law?
By Gaza in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 0Last Post: 27th November 2011, 09:22 PM -
The Art of Japanese Carpentry Drawing by Chris Hall
By Sheets in forum JAPANESE HAND TOOLSReplies: 6Last Post: 1st February 2010, 07:34 PM -
Group or link all Group Buys into a sub-forum such as Member Deals
By Bitslong in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 1Last Post: 24th June 2009, 12:10 AM