Thread: What's the Japanese method of dimensioning lumber?

I'm no expert, but I found the book "Japanese Woodworking Tools: Their Tradition, Spirit, and Use" by Toshio Odate really useful in understanding the various traditional tools and what is used how, etc.

Agree, Afro Boy -- it's a terrific book!

"just a matter of referencing against straight edges and winding sticks as in the Western tradition?"

Exactly right. The plane sole variation has more to do with the amount of wood the plane is expected to remove and its length (rough vs middle or fine). A jointer will have a contact point at both ends of the body (dai) as well as in between, but used mostly for squaring edges to the face(s).
So one just starts with one side of the board and then uses that as the reference for the remaining surfaces using kanna appropriate to the amount of wood to be removed and the desired finish.

There is also a book, "Japanese Woodworking. A Handbook of Japanese Tool Use and Woodworking Techniques" by Hideo Sato and translated by Koichi Paul Nii. I think this is combined in later editions with "Japanese Joinery" by Yasuo Nakahara with translation also by Koichi Paul Nii. Very useful if you get a hold of it (although, the joinery part makes me dizzy ).

Steve

p.s., lest I be mistaken for an "expert", I'm not. Those that don't know how, teach.

thanks for the info on the books, guess a trip to the library is in order.