Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
12th December 2008, 05:07 PM #1
So how do I put this thing together...
Hi Sketchup Gurus,
Have been busily beaveri8ng away designing my new workbench. Have done up the legs, feet and top rails complete with their mortice and tenons. The problem is I tried moving the bits so I could put it together now and see how it looks but I cannot seem to get the tenons to insert into the mortices accurately. There has got to be a trick to do this but for the life of me I cannot work out what it is. Any ideas??
TIA,
M.
-
12th December 2008 05:07 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
12th December 2008, 05:13 PM #2
-
12th December 2008, 05:18 PM #3
-
13th December 2008, 10:52 PM #4
Solution found
For those who were wondering what the solution is, Matrix kindly found it for me and I quote...
"Just change (in View) the Face style to Wire frame so then you can see inside the mortice so to speak. That way you can grab the end corner point of the tenon and move it to the corresponding point on the mortice."
As he said too easy; thanks Matrix!
Ciao,
M.
Similar Threads
-
Did I do the right thing
By Phil Spencer in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 10Last Post: 5th March 2008, 05:11 PM -
The thing we HAVE to put up with
By woodcutta in forum HAND TOOLS - UNPOWEREDReplies: 8Last Post: 20th December 2007, 08:56 PM -
Is this a 60 1/2 or some thing else?
By kiwioutdoors in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 5th August 2007, 04:57 PM -
now for a different thing
By fxst in forum WOODWORK PICSReplies: 5Last Post: 9th March 2006, 10:06 PM -
have I done a bad thing?
By Ivor in forum BANDSAWSReplies: 8Last Post: 22nd December 2005, 08:37 PM