Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 10 of 10
Thread: Plans for a firewood shed
-
14th August 2009, 05:21 PM #1New Member
- Join Date
- Jul 2008
- Location
- Australia
- Posts
- 5
Plans for a firewood shed
Does anyone know of a service which provides plans or a cutlist from a sketch or photograph.
I've been planning to construct the firewood shed (see pic), but I'm not confident about speccing it myself.
-
14th August 2009 05:21 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
14th August 2009, 08:01 PM #2SENIOR MEMBER
- Join Date
- Oct 2003
- Location
- melbourne
- Age
- 68
- Posts
- 939
What's wrong with the see what ya got to build it from then work it out.
-
14th August 2009, 10:25 PM #3New Member
- Join Date
- Jul 2008
- Location
- Australia
- Posts
- 5
That's just the kind of attitude, and skill, I lack. Inspiring.
Thanks Glenn.
-
14th August 2009, 11:01 PM #4SENIOR MEMBER
- Join Date
- Oct 2003
- Location
- melbourne
- Age
- 68
- Posts
- 939
Suppose it's different when you have wood on hand. An axe is about 800mm long so the wood shed is about 450mm wide and maybe 2m long and 1.3m high.
But you could make it what ever size you needed.
The corners look like two 75 x 35mm the supports for the wood and the larger cross pieces 130x 35mm. The rest is just weather boards.
Hope this helps. Where in Australia are you? It will need to be made out of durable wood aswell.
If you are near Williamstown I could mill the timber from my pile of cypress logs.
-
15th August 2009, 12:01 AM #5New Member
- Join Date
- Jul 2008
- Location
- Australia
- Posts
- 5
Thanks for that mate.
I'm in South Aust. Cypress sounds good but I guess it will need to be permapine.
Any tips on how to best hold it together ?
-
15th August 2009, 10:15 AM #6SENIOR MEMBER
- Join Date
- Oct 2003
- Location
- melbourne
- Age
- 68
- Posts
- 939
I'd use 75mm galvanised nails and smaller for weather boards.
-
15th August 2009, 06:24 PM #7New Member
- Join Date
- Jul 2008
- Location
- Australia
- Posts
- 5
Thanks for that.
-
18th August 2009, 12:27 AM #8Senior Member
- Join Date
- Jan 2005
- Location
- Brisbane
- Age
- 52
- Posts
- 468
i have a book i got from borders that has a very similar diesgn with full sketches etc, its called Sheds, by David and Jeanie Stiles.
If you use cypress, which i highly recommend....get blunt nails....cause it will help reduce splitting, or pre-drill...
-
18th August 2009, 12:58 AM #9New Member
- Join Date
- Jul 2008
- Location
- Australia
- Posts
- 5
I'll see if i can get hold of it - library maybe.
Also, I interested in why you recommend cypress. Any special advantages that I should know about?
-
18th August 2009, 08:04 PM #10Senior Member
- Join Date
- Jan 2005
- Location
- Brisbane
- Age
- 52
- Posts
- 468
Cypress - yes, it is termite resistant and other than being a bit 'splity' it comes up really well with a coat of oil. In fact its colour will come out to look a lot like the picture.
The cost is pretty reasonable - in Brisbane we are paying, through Cypress Supplies in Caboolture a 10% more than the equivalent treated pine. - So it look great, is termite resistant, has no chemicals, and is affordable. It is structurally sound - people build houses out of it.
Given, that you are going to be storing firewood in there - it will be a termite magnet! But, the other consideration is - if you are going to spend time building something - and researching something - why not make it look great and last a lifetime.
Best of luck - I have a similar plan for me in the next month or so.
Similar Threads
-
shed plans
By uniquo in forum WOODWORK - GENERALReplies: 2Last Post: 17th January 2009, 12:33 AM -
shed plans
By extrajosh2 in forum DESIGNS & PLANS FOR PROJECTSReplies: 3Last Post: 1st July 2007, 10:58 PM -
Shed Plans
By EBS in forum WOODWORK - GENERALReplies: 3Last Post: 19th September 2005, 06:47 PM