Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
15th June 2011, 07:23 PM #1
Pro Desktop 8 - Wood turned legs design
Hi everyone,
been so busy with my hall table project at school, I have designed a leg on pro desktop like my template for my wood turned leg, but I want to be able to turn it from 2d to 3d (revolve function), but my design (lines etc) is not a full shape where the shape is coloured in for some reason.
I have gone through the technique of copying half of the leg (one side mirror), with the prfile on one side and a straight line on the other, then clipping the waste lines away. After testing eg. pulling the straight line, it appears all lines are connected so it should mean it is a full shape, but doesn't appear to for some reason.
Any advice would be apreciated
Thanks
DavidJust another 17 year old who can work the remote
-
15th June 2011 07:23 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th June 2011, 09:29 PM #2
Problem solved, with a bit of patience, which I didn't have at the time I fixed it all.
Regards
DavidJust another 17 year old who can work the remote
Similar Threads
-
The StrongBad - All Steel Desktop Router Design
By JeremyFisher in forum CNC MachinesReplies: 11Last Post: 14th October 2010, 12:10 AM -
Where to get pre turned table legs?
By RobertAdair in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 4Last Post: 27th December 2009, 09:58 PM -
Turned Coffee table legs.
By Robomanic in forum WOODTURNING - GENERALReplies: 0Last Post: 22nd February 2009, 04:28 PM -
Desktop Design
By base63bkyn in forum WOODWORK - GENERALReplies: 2Last Post: 17th July 2006, 02:55 PM -
Turned table legs?
By bluemountains in forum TIMBERReplies: 0Last Post: 31st August 2005, 12:24 PM