Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
20th November 2011, 01:10 PM #1New Member
- Join Date
- Dec 2009
- Location
- Grafton
- Posts
- 9
Siemens solid edge free 2d cad - need help
There is some discussion in archives on this CAD program so somebody may be able to help.
I downloaded a few free CADs, then found Siemens Solid Edge 2D. I've found it really easy to use.
Imagine a rectulangar piece with a number of equal "sine wave" type curves, joined by tangent lines, along the top edge. The piece has square sides and base. Like a ruler with wavy lines on one long edge only.
I need to be able to STRETCH it to a number of different lengths - in the horizontal dimension only, retaining the existing vertical dimension. The piece will retain the same number of curves, but stretch them all equally. The radius of the curves will remain the same, the arc distance increases. as does the length of the tangent lines.
There is a tool where the piece can be stretched, but only by lengthening one selected part within it.
I've hunted through the program, but can't find anything. So if anybody can help, it would be really appreciated.
-
20th November 2011 01:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
glue solid timber edge strip/reinforcement to melamine?
By mhewitt in forum GLUEReplies: 5Last Post: 6th August 2009, 01:11 AM -
Free quality 2D CAD software - "Solid Edge"
By scooter in forum DESIGN & DESIGNING / GOOGLE SKETCHUPReplies: 4Last Post: 16th August 2007, 10:25 PM -
Attaching a solid timber edge onto veneer
By BobS in forum WOODWORK - GENERALReplies: 9Last Post: 28th April 2007, 01:38 AM -
3-edge roundover, 1-edge straight.
By CT in forum ROUTING FORUMReplies: 8Last Post: 21st May 2006, 01:05 AM