Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
4th February 2021, 12:31 PM #1
Timber 'veneered block, timber choices for aesthetic and playing look
Hey all.
This post is about seeking your thoughts on 'veneered' timber colour combo's.
I want to reduce the cost of the infill for a set of rebate planes, and a carriage makers plane, I'm about to make. They will be brass soled, with the brass folded to come up the sides a bit.
I want to use gidgee for the infill, but an @ 1200 x 200mm x 60 mm natural edge piece is $400. But I'd get all the infill with a lot left over.
A cheaper by the $/cubic meter is natural edge, thinner pieces of gidgee. Not thick enough for a infill piece.
I'm considering cutting @12mm outer, side, veneers from gidgee, with a center piece of a blonde/white timber such as Huon or Silver Ash. Or a reddish coloured piece such as Red Cedar, or chocolate like QLD Walunt.
I want to stay with Australian native species.
The blade wedge will be either gidgee or the centre piece of timber.
Your thoughts on the colour aesthetics will be gratefully received.
Clinton
Pics:
Top left QLD Walnut, then right is Silver Ash.
Bottom left is Gidgee, then right is Huon.Last edited by Clinton1; 4th February 2021 at 12:41 PM. Reason: Spelling and typos
-
4th February 2021 12:31 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th February 2021, 07:46 AM #2
Another light coloured Oz timber is Ivorywood which is quite dense.
I have some in the rack from when Forestry cleared out their Putney stash.
Also heaps of Silver Ash and NSW Rosewood scrap from chairs in process.
I can’t really comment on the design aspect,I’ve deliberately kept away from the plane challenge as I’ve too much on the go as usual.
Possibly mock up what your thinking in scrap similar coloured stuff.
Your welcome to drop over for some bits if you like.(Concord).
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
13th February 2021, 08:58 AM #3
Thanks for the reply and offer, mate. Might take you up on getting some pieces from you, if a cuppa would be involved
I'm no expert, but I've never heard of a blond/light coloured Ironwood.
-
15th February 2021, 07:35 AM #4
I don’t know if that was a typo but it’s Ivorywood.
Rough planed a bit for a pic.
You’re welcome to drop over and an cuppa is no probs.
I’m retired supposedly so am around home mostly.
PM me to tee something up.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
-
16th February 2021, 11:16 AM #5
Yes, it was a type.
I'll send you a pm
Similar Threads
-
Timber Choices
By WeepingAngel in forum WOODWORK - GENERALReplies: 1Last Post: 13th November 2012, 06:58 PM