Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: New wall lamp project
-
31st October 2009, 02:23 AM #1
New wall lamp project
Have the plan for a new wall lamp for the livingroom. Used for the design autodesk inventor 8.
The shade has open slats linked together with spacers at 5 places in the outline, and are placed between the fins.
For the lamp itself I'll use a electrical saving lamp of 15 watt, equivalent to a 60 watt lightbulb.
Have a few pictures of it presentation, so it is clear how it will look like.
The largest diameter of the shade is 290mm, and the overall height is 490mm.
It will be quite a challenge to build this lamp.
Thanks for watching.
Ad
-
31st October 2009 02:23 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
31st October 2009, 08:59 PM #2
Looks ambitious, but do-able. I'd suggest making the support arm somewhat more robust, though, even if computations indicate adequacy. If it doesn't hang quite plumb, the back of the mounting plate can be belt-sanded to correct - sort of a "fault-tolerant" escape procedure.
Cheers,
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
1st November 2009, 08:01 PM #3
Similar Threads
-
Hanging Project on Wall
By antonylord in forum WOODWORK - GENERALReplies: 5Last Post: 20th July 2009, 01:14 AM -
Project Lamp
By ro4441 in forum METALWORK FORUMReplies: 5Last Post: 6th May 2009, 07:36 PM -
Big Lamp
By Claw Hama in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 20Last Post: 27th September 2008, 11:16 PM -
My first Lamp
By Garell in forum WOODWORK PICSReplies: 6Last Post: 28th June 2006, 11:25 PM -
Lamp
By Westie in forum WOODWORK - GENERALReplies: 6Last Post: 24th September 2001, 09:45 PM