Needs Pictures: 0
Results 16 to 24 of 24
-
25th May 2021, 02:45 PM #16
it's a learning process (so they tell me)
mix gelled early on me
some sanding to be done lam1.jpg
read glassing advice after the fact, ie use 1% mekp for lam coat. (I used 2%)
I need a hug
-
25th May 2021 02:45 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th May 2021, 08:28 PM #17
deck laminated
used 800 ml resin 10 ml mekp. that's above 1%. for that size board, I would use 900 ml in future. not much wastage.
still ran out of time.
but a better result.
lam deck.jpg
-
6th June 2021, 04:25 PM #18
sanding coat on deck complete
looks OK (prep work and catalyst/resin calculations very important)
1.jpg
-
7th June 2021, 01:32 PM #19
sanding coat to underside
done
5.jpg
-
11th June 2021, 02:05 AM #20SENIOR MEMBER
- Join Date
- Jan 2003
- Location
- Osaka
- Posts
- 909
Keep strictly to manufacturers mix ratios, and if you feel adventurous, try an epoxy - you can get all different cure rates, but again, stick strictly to the supplied ratios.
I never really liked using MEKP, but it is cheap and well understood.Semtex fixes all
-
2nd July 2021, 03:42 PM #21
update
sanded fibreglass by hand 40-80-120-180-240
recycled some fins and tacked on with epoxy glue ready for glassing on
fin1.jpg
-
14th July 2021, 06:45 PM #22
nearly done
fins attached, sanded to 400 grit. put my name on it.
Finish coat and leash plug to complete.
bg1.jpg
-
26th July 2021, 02:27 PM #23
Next job
Removing fibreglass from an old board I shaped 10 years ago and reshaping. Going from 8' to 7'.
Left side showing new planshape.
reshape1.jpg
-
31st July 2021, 07:43 PM #24
planshape cut
now to clean it up
fish1.jpg
Similar Threads
-
Surfboard Shaping Stand
By skeghead in forum THE WORK BENCHReplies: 0Last Post: 26th April 2021, 01:22 PM -
Polyurethane for end grain - on top of polyurethane
By rtyuiop in forum GLUEReplies: 8Last Post: 3rd March 2018, 06:32 AM -
Polyurethane glues - How much do they foam outwards by?
By Batpig in forum GLUEReplies: 10Last Post: 22nd August 2011, 09:53 AM -
Foam Rollers for 2 Pack Polyurethane
By irose_57 in forum BOAT BUILDING / REPAIRINGReplies: 5Last Post: 14th January 2010, 07:19 PM -
Shaping foam rubber
By AlexS in forum BOX MAKINGReplies: 14Last Post: 26th November 2008, 03:37 PM