Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Cold Soldering.....On Purpose
-
14th June 2008, 11:24 AM #1
Cold Soldering.....On Purpose
G'day ppl,
My Rear Windscreen Demister has dropped it Electrical Tags off.
Where the Wires connect to the Demister at either side.
I'm looking to use LOW Temp Solder to reattach these,
so that I can see out the rear windscreen of a morning
Anyone know of the LT Solder I speak of?
Also where to get same?Navvi
-
14th June 2008 11:24 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
14th June 2008, 11:10 PM #2
Hi Ivan,
Wire glue from Jaycar http://www.jaycar.com.au might be suitable, CAT. NO. NM2831
Or try an automotive accessory place, I'm sure I've seen products claiming to be suitable for this purpose in one of these stores.
I not sure if demisters are really soldered to with heat - I would have thought there was a risk of overheating the adhesive bonding the resistive element to the glass.
-
15th June 2008, 11:29 AM #3
Ivan,
Dick smith used to sell a epoxy glue in a two part syringe that had a metal component used for "cold soldering". Jaycar or a specialist automotive retailer may have something similar.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
15th June 2008, 04:24 PM #4New Member
- Join Date
- Jun 2008
- Location
- Inner west, Sydney
- Posts
- 7
there used to be a "silver paint" for that purpose, it cost an arm and a leg, but it got it done.... i think you could get it from Jaycar or Dicky Smith
-
17th June 2008, 08:29 PM #5
Auto parts for electrically conductive glue, it's made for that purpose (ask for demister repair glue).
Chris
========================================
Life isn't always fair
....................but it's better than the alternative.
Similar Threads
-
silver soldering
By Rossluck in forum METALWORK FORUMReplies: 14Last Post: 25th September 2009, 09:01 PM -
Silver Soldering
By John Richards in forum METALWORK FORUMReplies: 15Last Post: 13th July 2008, 08:38 PM -
Multi purpose - What to Build
By mcchaddy in forum BOAT DESIGNS / PLANSReplies: 28Last Post: 9th November 2006, 09:20 AM -
Soldering Irons
By Bruce Micheal in forum WOODWORK PICSReplies: 2Last Post: 26th June 2005, 10:40 PM