Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: BA Falcon Bumper
-
1st May 2019, 07:41 PM #121 with 26 years experience
- Join Date
- May 2004
- Location
- Sunshine Coast Queensland
- Age
- 53
- Posts
- 1,402
BA Falcon Bumper
Hey Guys,
The front bumper on the falcon is just too damn low and very fragile.
All I want to do is avoid tearing the thing off for the last year or so that I'll have this car - thanks to the local park by feel merchants pretty much every panel is marked so I'm beyond caring about asthetics.
My question, is there any reason why I couldn't trim the bumper to the red line I've marked which is a mould line - the stone tray is not an issue as it's long gone.
Cheers
Smidsy
bumper.jpg
-
1st May 2019 07:41 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
1st May 2019, 08:22 PM #2
Because your car would the be Un Road worthy.
You will also find it very noisy, and possibly at speed it will start to tear it self upwards.
Also it is attached to part of the body work at lower points as well.
Also your guard liners will flap madly at wind.
Sorry Matt.
-
1st May 2019, 11:09 PM #3China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
You think that is low I have BF XR 6 it is lower again so I know how you feel, you just get used to going really slow over speed humps and parking well clear of those concrete bumper removal devices at the end of car parks
-
2nd May 2019, 10:25 PM #4
since the stone tray has gone, drill a few holes in the panel along its back end a zip tie to anything else that wont ome apart. that way when you come to sell it and the new owner replaces the stone tray no other holes would be seen.. jeez Iam good.
I would love to grow my own food, but I can not find bacon seeds
-
3rd May 2019, 07:45 AM #5
I know how you feel I’ve sold a 80k xr6 ute for a 110 rtv for ground clearance and load carrying dramas.
H.Jimcracks for the rich and/or wealthy. (aka GKB '88)
Similar Threads
-
Dented Bumper
By Rodgera in forum WOODIES JOKESReplies: 0Last Post: 29th September 2016, 03:02 PM -
Bumper Sticker
By Jerry Thompson in forum NON WOODWORKReplies: 4Last Post: 3rd June 2012, 08:54 AM -
help with bumper repair
By macklin in forum MOTOR VEHICLESReplies: 0Last Post: 24th March 2011, 06:14 PM -
bumper sticker
By weisyboy in forum WOODIES JOKESReplies: 4Last Post: 5th August 2007, 07:54 PM