Thanks: 0
Needs Pictures: 0
Results 1 to 1 of 1
Thread: Some small stuff.
-
23rd February 2024, 06:26 PM #1Novice
- Join Date
- Jul 2023
- Location
- adelaide
- Age
- 73
- Posts
- 14
Some small stuff.
Yesterday I made another twin lobe points cam. The original I made worked fine, but was slightly out, so I did a little more filing, too much ask it turned out, a few swipes with a file took it past the midway point on the backing plate adjustment.. I've made a few of these points cam, very difficult to get accurate, one swipe of the file can ruin a hole days work. But this one I got spot on for both cylinders. Today, I made a clamp to hold a bit of felt to lube the cam, very small exacting work. After all that I polished the cam and backing plate, just because something isn't seen doesn'mean it shouldn't be shiny. I once polished the rocker arms on a Bonny.
-
23rd February 2024 06:26 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
Similar Threads
-
Small Stuff
By BobL in forum METALWORK FORUMReplies: 0Last Post: 20th July 2015, 09:55 PM -
Some small stuff
By BobL in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 3Last Post: 3rd May 2009, 10:42 PM -
Some Small Stuff
By Stu in Tokyo in forum WOODTURNING - GENERALReplies: 4Last Post: 12th July 2008, 11:30 PM -
Small stuff I made
By Shedhand in forum WOODWORK PICSReplies: 10Last Post: 25th June 2007, 10:05 AM -
Small Stuff
By DarrylF in forum WOODWORK PICSReplies: 5Last Post: 22nd January 2004, 06:09 AM