Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: VW Beetle problem
-
3rd January 2013, 10:48 AM #1Senior Member
- Join Date
- Mar 2005
- Location
- Razorback
- Age
- 67
- Posts
- 194
VW Beetle problem
Hi All,
I was hoping somebody out there can help me. I am assisting my son restore a 1967 VW Beetle that is in pretty ordinary condition. Like almost every bug from that era the lower section of the windscreen sill is like swiss cheese. I've been able to rebuild the driver's side sill, but the passenger's is even worse. Does anybody know of a source of a replacement section? There are a lot of body panels and repair sections available out there, but I can't find a windscreen sill section.
thanks,
Peter
-
3rd January 2013 10:48 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
3rd January 2013, 01:36 PM #2
Peter I guess you've tried all the usual haunts VW King at Riverwood etc
home page
Vintage Vee-Dub Supplies - Links Page
If I am right your talking about the section where the interior vent is located just near the sweep up is on the bend.
Edited to add VOLLKS.COM.AU for all VW Parts, Volkswagen Parts, Restoration Parts, Vintage VW Parts, Aircooled Parts, VW Accessories, Bug Parts, Kombi, Type 1, Type 2, Type 3, Type 4, all at Australia's lowest prices and delivered to your door
-
3rd January 2013, 02:39 PM #3Senior Member
- Join Date
- Mar 2005
- Location
- Razorback
- Age
- 67
- Posts
- 194
Thanks Wheelin
Thanks Wheelin,
The vintage VW guy had a beetle he was wrecking with a good section. I'm heading up there tomorrow to cut it out. I hadn't seen his website before, so now I have another place to spend my hard earned dollars. My first car in 1975 was a 1960 beetle that my dad bought for $50 and I spend a year cutting out the rust, etc. I'm amazed at how much easier and cheaper it is to obtain parts now compared to then. The down side however is that this bug is way worse than the last one I restored - I suppose that's what 44 years of decay will do to steel.
cheers,
Peter
-
3rd January 2013, 07:14 PM #4
Glad to help Peter............its going to cost you some photo's of the old girl though
My first drive of a VW was FiL's 67 1300 our 1st was an 1100 66/67 then a 68 1300 mid 90's FiL's 3rd VW his old 1600S for the kids to learn to drive in it got a 7 years of additional love from well 2 of them. Sold it off to a mate for his kids to learn in.
Fastest time for a clutch change 40. mins on a mates I had to let it cool down first that was at 8pm at night.
Eldest son and I did one in 30mins start to finish.
-
3rd January 2013, 09:38 PM #5Senior Member
- Join Date
- Mar 2005
- Location
- Razorback
- Age
- 67
- Posts
- 194
It looks pretty sad right now
I'll take a few photos tomorrow. It's a sad looking car right now but it's a great project.
With a few months work and a lot of patience it should be back to a nice little bug.
Thanks again for your help - I'd almost given up as was going to try and make the section myself.
Funny how the clutch change time is a matter of pride with bug tinklers. I think 20 minutes was my best with a cool motor. I still have an old piece of gearbox centre shaft that I acquired when I was 17. I used it for the innumerable clutch changes - usually blew up the motor so just change din another old one I had, recycled the clutch and pressure plate from motor to motor.
Now I know why I kept the shaft - never know when you'll have to put a clutch in a Volksy (and I suspect we'll be doing it a bit more often now).
cheers,
Peter
-
3rd January 2013, 09:48 PM #6
No hurry Peter with photo's
Never used the nput shaft just big screw driver or end of crack bar or extention a wiggle and she slid in.
-
3rd January 2013, 11:20 PM #7
Google Peter Tomassini he will make you one.
-
12th January 2013, 04:43 PM #8Senior Member
- Join Date
- Mar 2005
- Location
- Razorback
- Age
- 67
- Posts
- 194
Amazing
I watched his YouTube video on making a monaro quarter panel - simply amazing work.
Fortunately I found a good section from a donor vehicle. I suspect if he made that section for me, the investment in the car would immediately double or triple.
-
12th January 2013, 05:37 PM #9
Been out to his workshop and had a chat with him, He works 5days a week and hangs out at hi shop on the weekend for all the blokes to bring in their projects to get help on.
Odd guy but super helpful.
Peach has retired and lives in Eltham I think. Peter will work till he dies.
-
12th January 2013, 06:05 PM #10
I have nothing helpful o add, but I am astounded you can't buy every part new for bugs. You know you can get a whole new body for an mgb and tr2-3 you have the choice of steel or aluminium.
My first car was another $50 beetle, 62 6volt as I recall. Couldn't get it through rego due to king pins, sold it to some blokes wanting to build a bush buggy.I'm just a startled bunny in the headlights of life. L.J. Young.
We live in a free country. We have freedom of choice. You can choose to agree with me, or you can choose to be wrong.
Wait! No one told you your government was a sitcom?
-
12th January 2013, 06:57 PM #11
Similar Threads
-
Gatto's VW Beetle... Extremely slow W.I.P.
By Yonnee in forum SCALE MODELLINGReplies: 174Last Post: 9th August 2014, 09:17 PM -
vw beetle
By bobman 58 in forum SCALE MODELLINGReplies: 6Last Post: 31st May 2012, 08:27 PM -
Pine Beetle Wood Turning
By Barry Bennett in forum WOODWORK - GENERALReplies: 9Last Post: 28th September 2011, 10:44 PM -
Woodworm or beetle identification and treatment?
By r3nov8or in forum WOODWORK - GENERALReplies: 7Last Post: 14th May 2011, 06:22 PM -
Woodworm / Furniture Beetle treatmet?
By smee in forum WOODWORK - GENERALReplies: 6Last Post: 21st June 2004, 10:19 AM