Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Learning Autocad (2005)
-
26th January 2008, 06:03 PM #1Senior Member
- Join Date
- Jan 2008
- Location
- Australia
- Posts
- 153
Learning Autocad (2005)
Can anyone point me in the right direction for recommended autocad (2005) learning resources? Possibly books, websites, modestly priced courses, etc with structered learning steps.
It looks like quite a complex programme, but I am determined to learn it. I am pretty good with computers in general, and use them on a daily basis. I follow paper cad drawings pretty often, but don't have any graphic design or drawing experience though.
One thing in particular I am looking to do is generate measurements onto an existing drawing, so when I print it I can use it without a scale ruler.
Cheers
-
26th January 2008 06:03 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
26th January 2008, 06:54 PM #2Member
- Join Date
- Aug 2004
- Location
- Newcastle
- Posts
- 87
There are some online tutorials here.
http://www.we-r-here.com/cad/tutorials/index.htm
Mark
-
26th January 2008, 07:06 PM #3
I purchased this http://www.mup.unimelb.edu.au/catalo...2-85007-3.html fro Melboure Uni a few years ago ..... it is only AC2000i however as AC bring out a new version each year I wonder how much it really changes .... I doubt the basics have changed at all.
The cd is of a good pace and easy to follow.Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.
-
26th January 2008, 07:38 PM #4Senior Member
- Join Date
- Jan 2008
- Location
- Australia
- Posts
- 153
Thanks guys
-
26th January 2008, 07:56 PM #5
another source is you tube. Just type autocad into the search and Bob's your sister's father's brother.
Thank God for senility... now I don't feel so silly any more.
-
26th January 2008, 08:30 PM #6
For an AutoCad book, I recommend Mastering AutoCad http://www.omura.com/
Had his book when I started with AutoCad 9 (long time ago), it really helped with the steep learning curve. He brings a new book out for each release of AC.Traba non folis arborem aestima
-
1st March 2008, 09:46 PM #7Member
- Join Date
- Mar 2005
- Location
- Hobart
- Posts
- 71
Try this address
www.augi.com. This is website of the Autocad User Group international. I run a CAD office and find this resource to be very useful. It has an area where you can enrol for online courses in all things CAD from novice to advanced.
Regards
John
-
2nd March 2008, 03:33 AM #8One thing in particular I am looking to do is generate measurements onto an existing drawing, so when I print it I can use it without a scale ruler.
I take it that you want to use existing digital drawings and dimension them?
You can also scan hard copy drawings then do drawing overlays then add dimensions.
Open you existing drawing you may have then right click the top tool bar ACAD: Dimension which will bring up the dimension tool bar.
Have a play. Many people only use about 15% of AutoCAD any rate.c2=a2+b2;
When buildings made with lime are subjected to small movements thay are more likely to develop many fine cracks than the individual large cracks which occur in stiffer cement-bound buildings. Water penetration can dissolve the 'free' lime and transport it. As the water evaporates, this lime is deposited and begins to heal the cracks. This process is called autogenous healing.
Similar Threads
-
Autocad LT 2007 and Autocad 2007
By Toolin Around in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 6Last Post: 31st January 2007, 11:42 PM -
Autodesk AutoCAD 2004
By ozwinner in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 11Last Post: 6th March 2004, 10:32 AM -
Melb Woodies : Autocad 1 course at Holmesglen ?
By Justin in forum WOODWORK - GENERALReplies: 5Last Post: 18th September 2003, 12:46 AM