Results 1 to 2 of 2
  1. #1
    Join Date
    Feb 2015
    Location
    Oz
    Posts
    615

    Default Yet another trike

    I thought I’d apprise you all of one of my hobbies, building recumbent trikes. Why? Well they are far more comfortable than MTBs, which I can no longer ride anyway, and much faster than road bikes. Here’s my latest effort, not painted yet, just assembled to test for bugs before the paint. Suspension has nine evenly spaced settings and works really well, smooths out bumps and potholes exceptionally well. Centrepoint steering but no Ackerman on this one, I opted for stable steering at speed, so no tight turning circles either. I’ve retained 700c wheel at the rear, 20” wheels at the front and hydraulic brakes. Cycle parts are Shimano Deore and brakes Tektro hydraulic disks, courtesy of my MTB I can no longer ride. Chain droop is managed by four idlers I turned up on the lathe fitted with two 8x22mm bearing which lift the chain free of the rear forks Seat is again 3mm aluminium shaped for a comfortable ride shocky is from an MTB. Main frame is 32mm tubing with forks made from 35mm x 20mm tubing.. I have added a couple of threaded holes on the tail for inclusion of a rack and a water bottle holder is fitted at front with tubing to the seat area, culminating in an adjustable plastic hose. Toe in is handled by a 6mm rod threaded right/left hand thread so one only has to turn clockwise to bring toe in and anti clockwise to bring toe out, then lock off with locknut. Brake calliper mounts are independent of the steering arms and attached to steering levers via short threaded rods and tie rod ends. I’ve reversed the gear levers so the left side handles the 9 speed cluster and the right the three speed front cogs. Camber is around two degrees, and caster about the same. Wheelbase is 120cm and track is 79cm. weight is 19kgs, wet. About the same as an MTB. Very happy with this, the eight trike I’ve built, each one gets better than the last, the suspension is the biggest leap forward along with lever steering, I’d never build a trike without these two additions now, they make riding so much more enjoyable. Just need to paint it now. Just one of my hobbies, I have an XS 650 motor on the bench at the moment, bottom end is done, just waiting for a couple of new pistons before I rebore the barrel. I’ve always been a serial builder of stuff, as my wife likes to point out. Despite the PsA destroying my hands and using them causing unbelievable pain, one must continue with what one likes to do. Just takes me a hundred times longer to do anything. I’ll never be able to ride the 650 due to the pain in my hands but, bikes are my first love so I’ll probably still be building bikes/trikes when I leave for the great workshop in the sky. Hope they have metal lathes up there, couldn’t do without mine.
    Attached Images Attached Images

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Sep 2010
    Location
    Port Sorell, Tasmania
    Posts
    592

    Default

    Nice build, hope riding it gives you much pleasure. I'd be devastated if I wasn't able to ride my bike.

    Tony
    You can't use up creativity. The more you use, the more you have. ~Oscar Wilde

Similar Threads

  1. More on the trike build.
    By sacc51 in forum CYCLING
    Replies: 12
    Last Post: 4th December 2018, 11:10 PM
  2. A trike build instead
    By sacc51 in forum CYCLING
    Replies: 5
    Last Post: 14th October 2018, 06:30 PM
  3. Recumbent trike.
    By casjon in forum CYCLING
    Replies: 1
    Last Post: 3rd March 2015, 11:16 PM
  4. Tike not trike
    By SHIPPERS in forum TOY MAKING
    Replies: 7
    Last Post: 1st March 2009, 08:55 PM
  5. Trike
    By Andy Mac in forum METALWORK FORUM
    Replies: 3
    Last Post: 26th October 2006, 09:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •