Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Water pump install.
-
11th October 2018, 11:21 AM #1SENIOR MEMBER
- Join Date
- Feb 2015
- Location
- Oz
- Posts
- 615
Water pump install.
I had a spare water pump that I normally use for pumping coolant around my lathe so decided to put it to work on my van. Previously, I've installed diaphragm pumps but the noise and high pressure really turned me off them.
This pump is a brushless centrifugal which can be mounted outboard or submersed and has a head height of around 1.5 metres.
I had to fab an aluminium bracket to support the pump, plumbed it to the existing hand pump tap and installed a push button switch at the back of the benchtop.
The pump works well, it's silent and supplys plenty of water with little to no pressure so, the manual hand pump can now be use by hand as originally intended or electrcally by just pushing the switch.
https://www.youtube.com/watch?v=-nfhH0V_HbA
-
11th October 2018 11:21 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Petrol Water Pump vs Electric Water Pump with Generator
By Reno RSS Feed in forum GENERAL ODDS N SODSReplies: 0Last Post: 29th December 2015, 02:00 PM -
Water pump on Ebay
By Bob Willson in forum CNC MachinesReplies: 7Last Post: 28th September 2013, 08:47 PM -
Heat pump install - hobart
By Reno RSS Feed in forum PLUMBING, ELECTRICAL, HEATING, COOLING, etcReplies: 0Last Post: 24th February 2009, 05:40 PM -
Heat Pump Hot water
By Smurf in forum HEATING & COOLINGReplies: 23Last Post: 25th January 2008, 01:23 PM