Gabbett Open Day (Sydney)

**Ruddigar** · 22nd April 2008, 01:28 PM

At this years’ Timber & Working With Wood show, Gabbett Machinery will be demonstrating the new SawStop machine.

For those unaware, SawStop is a 10” cabinet saw, with a unique safety feature that senses human contact with the sawblade. Once contact has been detected, the blade is stopped and dropped below the table bed, all within five milliseconds.

Demonstrations of a this machine tend to draw large crowds. Recent exhibitions have seen over fifty people assembled to see the SawStop in action. Unfortunately, a lot of them cannot get a clear line of sight to the saw.

Which is why, this year, we have decided to have a special Pre-show Exhibition in our Sydney showroom!

Our showroom offers a bit more space than a 4m x 3m booth at the wood show, so everyone should be able to see the demo. The extra space also makes it possible for us to demonstrate the MiniMax machines. A wide spread of MiniMax products will be set up and available for you to play with. MiniMax machines will not be going to the wood show!

There will be some red-hot pricing on some ex-demo machines too.

The Pre-show Exhibition will be held on Saturday the 24th of May, from 9am until 4pm. Our showroom is at 359 Vardys Rd, Kings Park.

Fire away with any questions.

<O

</O

**Ruddigar** · 6th May 2008, 01:09 PM

More information:

We have decided extend the show...

SawStop demonstrations will take place at Gabbett's Sydney office on the 22nd, 23rd and 24th of May, four times a day.

Demo's will be at 10am, 12 midday, 2pm and 4pm daily.

MiniMax machines will be on display and available for play throughout the day. (that rhymes....)

Any interest?

**wheelinround** · 6th May 2008, 01:17 PM

Just to make it easy here's where you can find them

359 Vardys Road
Kings Park NSW 2148
AUSTRALIA

TEL: 02 9831 5044
FAX: 02 9831 5538
Spare Parts TEL: 1300 650 591

**Pat** · 6th May 2008, 01:20 PM

Ray, you getting some of the action from Ruddy?

Ruddy, I'll see you at the show

**Howdya do that** · 6th May 2008, 02:59 PM

Which day and what time are the free beers on?

**Ruddigar** · 6th May 2008, 03:05 PM

Originally Posted by Howdya do that

Which day and what time are the free beers on?

Whichever day you choose to rock up with a boot full of beer....

**Howdya do that** · 6th May 2008, 04:57 PM

How many beers does a sawstop cost?

**Ruddigar** · 8th May 2008, 01:20 PM

Originally Posted by Howdya do that

How many beers does a sawstop cost?

Many, many beers.

Enough for me to obtain the dutch courage to go ask the boss to swap a SawStop for beers, and enough beers for the boss to agree....

**Pat** · 9th May 2008, 08:21 AM

Originally Posted by Ruddigar

Many, many beers.

Enough for me to obtain the dutch courage to go ask the boss to swap a SawStop for beers, and enough beers for the boss to agree....

So two beers for you Ruddy and 22 for the boss

**wheelinround** · 9th May 2008, 10:04 AM

Originally Posted by Pat

Ray, you getting some of the action from Ruddy?

Ruddy, I'll see you at the show

No just hate it when you have to go looking for where they are

Monkey Madness

**Ruddigar** · 9th May 2008, 10:26 AM

Originally Posted by wheelinround

No just hate it when you have to go looking for where they are

Monkey Madness

I didn't think it was that hard to find....

From my original post;

Originally Posted by Ruddigar

The Pre-show Exhibition will be held on Saturday the 24th of May, from 9am until 4pm. Our showroom is at 359 Vardys Rd, Kings Park.<O

</O

**Ruddigar** · 20th May 2008, 09:15 AM

Just a reminder that the inhouse show starts in two days.

Hope to see a few of you here.

**Gaza** · 20th May 2008, 10:12 PM

i am about to buy a alumium miter saw, the 350mm big bugger single phase with in feed out feed and fence with stop, any chance of a forum discount if i buy it during the pre woodwoking show show.

**Ruddigar** · 20th May 2008, 11:12 PM

Originally Posted by Gaza

i am about to buy a alumium miter saw, the 350mm big bugger single phase with in feed out feed and fence with stop, any chance of a forum discount if i buy it during the pre woodwoking show show.

I'd love to say 'yes'....but probably not.

Our Alu stuff is not being discounted at the pre-show woodworking show show(

).

But turn up and twist Lee's arm. You never know your luck...

**Gaza** · 21st May 2008, 08:24 PM

will do, lee has been speaking to my dad a few times about it, i have got the price off the competion but i reckon gabbetts is a fine estabishmnet to buy from even better if you get the sale,

so ill ask for you when i am there

Thread: Gabbett Open Day (Sydney)

Thread Tools

Search Thread

Gabbett Open Day (Sydney)

Similar Threads

Mik Sydney open days

He has finally come out into the open

MJE open day

Tags for this Thread

Posting Permissions