Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 91 to 105 of 151
Thread: SawStop Comes To Australia!
-
29th January 2008, 09:06 PM #91Retired
- Join Date
- Jul 2007
- Location
- Kiewa
- Age
- 64
- Posts
- 1,636
Niki,
When cutting strips for edgebanding, I rip 12mm strips, one after the other. When you've cut most of the board, you're left with say a last strip of maybe 30mm or less. And then 15mm or less. Short of adjusting a featherboard one cut after the other, you must apply side pressure as you feed. Particularly if ripping alone. Burn marks aside, it's hard (for me at least) to do this well without getting within close proximity to the blade. Not too close, but close enough to worry.
If you have a better method, take a video and post it! I've seen some sacrificial push sticks used, but without a riving knife, you still need side pressure for decent cuts.
Again, I rip strips frequently, so setting up featherboards etc is a pain.
Jeff
-
29th January 2008 09:06 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
30th January 2008, 07:25 AM #92Deceased
- Join Date
- Jan 2006
- Location
- poland
- Age
- 78
- Posts
- 761
Hi Jeff
Well, if "time is money" for you, I agree with you that my method is slower.
I'm using a sled and "feather rollers" that I reset after each cut like this one
Attachment 66104
Or you can make a "feather roller" like this one that you don't have to reset after every cut...
Attachment 66103
Or as I made lately, a wooden one
Attachment 66102
Best regards
niki
-
30th January 2008, 10:39 AM #93Retired
- Join Date
- Jul 2007
- Location
- Kiewa
- Age
- 64
- Posts
- 1,636
Niki, very impressive!
Food for thought. A nice set up for when I get my new saw. I do like the infeed and outfeed table supports as well.
thanks Jeff
-
6th February 2008, 07:45 PM #94
SawStop
According to this 300 finger saves with 9000 SawStops = 1 finger save per 30 SawStops. Given that this is a relatively new product, this says that on average 1 in 30 operators of saws equipped with SawStop would have injured or lost all or part of a finger. I think these figures seem a tad high. Just imagine, in that same time period how many injuries there must have been around the world as probably 99.9% of all saws do not have SawStops.
Does anybody have statistics on table saw injuries that we can compare this with?
Personaly, I don't like one in 30 odds, I'll stick to my old Beaver saw.
Cheers
Don
-
6th February 2008, 09:26 PM #95Deceased
- Join Date
- Jun 2003
- Location
- ...
- Posts
- 7,955
Fully concur with your reasoning.
If you add up all the TS without this alledged wonderful feature (including contractor saws, cabinet saws, and Triton workcentre like saws) and divide that by 30 to get the number of finger injuries than these kind of saws would be banned by all governments as there would not be enough Emergemcy departments in the hospitals to cope.
These claims sound pure advertising drivel to me.
Peter.
-
7th February 2008, 01:01 PM #96
You do have to look for the confounding factors with any statistics though. The people who buy sawstops are probably at higher risk to start with such as schools tafe equivalents etc.
-
9th February 2008, 02:23 PM #97
Quite interesting to see that SawStop is such a hot topic everywhere.
I just received mine Monday.
Feel free to ask any questions. So far it's confirmed to me that I made the right decision in buying it.
-
9th February 2008, 09:15 PM #98
-
9th February 2008, 09:35 PM #99
-
9th February 2008, 10:16 PM #100
Good on you Bri, hopefully you won't lose a finger in the BS, jointer or thicknesser
Nah, seriously, nice one.
Be interested in hearing what you think after using it for a while.
-
10th February 2008, 09:01 AM #101"Clear, Ease Springs"
www.Stu's Shed.com
-
10th February 2008, 12:56 PM #102
-
10th February 2008, 01:35 PM #103
-
10th February 2008, 05:48 PM #104
Yeah, but a SawStop brake is never going to work on a butcher's bandsaw is it! (Think about it)
In any event, if you've watched a butcher operate a bandsaw you would have to say that it would only be a matter of time. In their defense, they are usually operating the machine with the customer waiting and are therefore under time pressure. That's how most accidents with power tools occur.
A tablesaw is a far more dangerous tool than any bandsaw that you and I are likely to use. Full stop.
As for jointers, they don't need to be dangerous either. I cannot see how you could injure yourself with a properly adjusted Euro style guard installed. The old style "guard" is not really a guard. It's a self-replacing temporary cover, at best!
-
11th February 2008, 12:40 AM #105
Bri,
welcome, what's all the white stuff ouside your window? Did you spray paint your lawn white?
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
Similar Threads
-
SawStop in Australia?
By jefferson in forum TABLE SAWS & COMBINATIONSReplies: 15Last Post: 9th November 2007, 11:51 PM -
Firewood Consumption in Australia
By dadpad in forum TIMBERReplies: 56Last Post: 28th June 2007, 06:14 PM -
The Official Adelaide Test Thread
By bitingmidge in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 210Last Post: 6th December 2006, 08:36 AM -
Should Australia be a Republic?
By mario118 in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 82Last Post: 9th June 2006, 02:26 PM -
Australia Gets Drunk, Wakes Up In North Atlantic
By Rodgera in forum WOODIES JOKESReplies: 4Last Post: 22nd May 2006, 11:33 PM