Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 38
Thread: Port Drinkers advice needed
-
26th November 2005, 11:39 PM #1
Port Drinkers advice needed
hi guys
i bought a 4 litre port barrel on e bay that has been dry for a while and have revived it by soaking in a tub of water for 3 days.
It was a wax lined barrel as a fair few flakes of wax came out
As it was wax lined,when i fill it full of port could i add some brandy to soak into the wood to enhance the flavour?or would the wax that is remaining in the barrel stop it from soaking into the oak:eek:
thanks in advance to your replys
greg
-
26th November 2005 11:39 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
27th November 2005, 07:38 AM #2Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
Wax? :confused:
Sounds as though it is an ornament only.
Never heard of it in side a coopered barrel.
Al :confused:
-
27th November 2005, 07:40 AM #3Senior Member
- Join Date
- Aug 2004
- Location
- Wide Bay Qld.
- Age
- 81
- Posts
- 179
No barrel should be wax lined as it needs fluid seepage into the wood to keep it tight
As far as the brandy goes toss in 250 ml brandy, 500 ml rum and top up with good port, immerse a stick of cinnamon for 4 days then discard stick then let it mature will warm the body no end on cold night, day, morning, evening.
Cheers Arch.
-
27th November 2005, 01:48 PM #4
just out of curiosity.
how long can post stay in a port barrel for before requiring to be drunk?
or can you just leave it indeffinatly?
-
27th November 2005, 02:08 PM #5
About 5 minutes
DEpending ipon the quality of the port and the integrity of the barrel one would have to say several years.
Ideally stored in a cellar with minimal temperature variations.
We once went away camping and had a two litre cask of port which we tried at 8.00pm, it was pretty ordinary but by midnight it had improved dramatically, as did our headaches the following morningStupidity kills. Absolute stupidity kills absolutely.
-
27th November 2005, 04:49 PM #6
I thought I read somewhere that port doesn't improve with age?
Or maybe vintage port doesn't? Tawny port mebbe?
Bit dry 'round here
Cheers.............Sean, over a barrel
The beatings will continue until morale improves.
-
27th November 2005, 05:41 PM #7Originally Posted by scooter
-
27th November 2005, 07:24 PM #8Originally Posted by TermiteStupidity kills. Absolute stupidity kills absolutely.
-
27th November 2005, 07:28 PM #9Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
How the hell can you lay down a good port.
Drink it!!!!!
Al
-
27th November 2005, 07:51 PM #10
Come on gentle men. The man asked a serious question.
Mate, the life of a cask of port is related to the size of the tap and hence the rate at which it can flow through said tap. Mind you, one must consider the swallow rate of the clown lying upside under the tap with his mouth open - while drowning in port is fun, it does tend to ruin the computations
Richard
-
27th November 2005, 07:52 PM #11Originally Posted by Iain
They were buying wine in Italy for 30 cents a litre and reckoned that the second 500cc tasted a hell of a lot better than the first 500cc.
And I did read your response, it's just that my short term memory is a bit wonky.
There's a name for it, Als.... Als? Ah yes, that's it Al's Crapatorium.
-
27th November 2005, 07:54 PM #12Originally Posted by Daddles
-
27th November 2005, 08:03 PM #13Originally Posted by Termite
-
27th November 2005, 08:13 PM #14Originally Posted by Auld Bassoon
-
27th November 2005, 10:16 PM #15
Similar Threads
-
Wood Carving tools + Wood Advice needed BAD
By tiki in forum WOODWORK - GENERALReplies: 8Last Post: 23rd July 2006, 09:51 PM -
Advice needed on combi-saw
By wooded in forum HAND TOOLS - POWEREDReplies: 6Last Post: 27th August 2005, 01:03 AM -
Woodcarving tool advice needed
By Murel in forum WOODCARVING AND SCULPTUREReplies: 3Last Post: 22nd October 2004, 09:53 PM -
Advice needed
By Dave in Malanda in forum TIMBERReplies: 5Last Post: 6th November 2002, 12:18 AM