Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 10 of 10
  1. #1
    Join Date
    Jul 2000
    Location
    Drop Bear Capital of Gippsland (Lang Lang) Vic Australia
    Age
    74
    Posts
    6,518

    Default Image quality reducing

    I have been looking at some of my older images and they are brilliant and sharp, of late they seem to have deteriorated and I am at a loss as to why, focus is good but when enlarge they appear blotchy.
    Do the memory cards deteriorate with age therefore causing this problem? or any other factors.
    The lens is spotless and the focus is OK, I have even tried manual focus but to no avail.
    Camera is the Fuji S7000 Digital SLR.
    Stupidity kills. Absolute stupidity kills absolutely.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Jun 2007
    Location
    North Of The Boarder
    Age
    68
    Posts
    16,794

    Default

    Quote Originally Posted by Iain View Post
    I have been looking at some of my older images and they are brilliant and sharp, of late they seem to have deteriorated and I am at a loss as to why, focus is good but when enlarge they appear blotchy.
    Do the memory cards deteriorate with age therefore causing this problem? or any other factors.
    The lens is spotless and the focus is OK, I have even tried manual focus but to no avail.
    Camera is the Fuji S7000 Digital SLR.
    Apparently memory cards do deteriate I found this out only recently.
    Memory chips have different speeds to process at, slow batteries,dirty or damaged conetors o dirt in the female section, and internal dust or mould could be causing the problem on the lens.

    Not sure how you remove images from your card but after a total clean out how often do you format.???
    If you know how you are able to used Windows Scandisk to check for bad sectors etc to much formating can also damage them same as Hard drives.

    Static will cause damage to memory chips and over heating.

    Ray

  4. #3
    Join Date
    Nov 2003
    Location
    Australia and France
    Posts
    8,175

    Default

    Have you changed the jpeg compression setting?

    P

  5. #4
    Join Date
    Oct 2003
    Location
    Romsey Victoria
    Age
    63
    Posts
    3,854

    Default

    If the memory card was deteriorated then you probably wouldn't be able to use it at all.

    Your camera has a whole lot of software inside that does sharpening and saturation adjustments. Do you have control over these? If so does that help.

    Can you post a link to a full size image so I can have a look see?

    Chris
    Photo Gallery

  6. #5
    Join Date
    May 2005
    Location
    Eden Hills, South Australia
    Age
    63
    Posts
    3,458

    Default

    Need glasses?
    Those are my principles, and if you don't like them . . . well, I have others.

  7. #6
    Join Date
    May 2004
    Location
    Pakenham, outer Melb SE suburb, Vic
    Age
    54
    Posts
    4,158

    Default

    I wonder does the sensor in the camera deteriorate?


    The beatings will continue until morale improves.

  8. #7
    Join Date
    Oct 2003
    Location
    Romsey Victoria
    Age
    63
    Posts
    3,854

    Default

    Need glasses?
    I told him if he didn't stop he'd go blind.

    I wonder does the sensor in the camera deteriorate?
    Yes, but I would imagine you would end up with dead pixels rather then the entire image appearing blotchy. The sensors have tiny little colour filters over each of the pixels. Over time the colours can fade as the filters fade.
    Photo Gallery

  9. #8
    Join Date
    Oct 2005
    Location
    Adelaide
    Posts
    1,024

    Default

    The memory card is just storage for whatever the camera puts there. It doesn't suffer from the sort of deterioration film does. If it breaks, you lose all of the photos...

    The deterioration could be due to a number of things, but most likely, the jpeg processing or the ISO has been changed, and changing it back may well recover the missing quality.

    Can you post a sample of a good and bad image?

    Woodbe.

  10. #9
    Join Date
    Jul 2000
    Location
    Drop Bear Capital of Gippsland (Lang Lang) Vic Australia
    Age
    74
    Posts
    6,518

    Default

    Had a fiddle thisafternoon, did a reformat, camera does that for me and found that the settings had changed to 3mp, that would explain a lot.
    The image was OK until I wanted to crop something out, now that 3mp rather than 12mp would explain a hell of a lot.
    I'll take a piccy and blow it up and see what happens, apart from that I can't post a full size image or even email one, far too big.
    Thanks for the advice but I had a feeling that I had seen somewhere that memory cards can lose their edge after a while.
    The card is a Scandisk 512mp XD.
    Sean, the sensor is CCD, far more reliable than CMOS, I have not had one let go yet in any of my cameras.
    Stupidity kills. Absolute stupidity kills absolutely.

  11. #10
    Join Date
    Dec 2005
    Location
    Canberra
    Posts
    3,260

    Default

    Memory cards may deteriorate with age (a limit of about 100,000 write cycles); however this isn't going to effect information stored on them in a way such as a photo loosing sharpness.

    If you have had loss of information in a picture, you'll find that it will either not open at all (with an error message like "cannot open the file as it appears to have been damaged") or specifically in the case of a jpg, part of the image may just be grey if the file has been truncated. (the data to describe the file type and the size of the file still exists...but the data for the image runs out partway through so the whole image can't be drawn).

    You could be seeing the results of re-saving the image as a jpg too many times. Jpg is a lossy compression scheme, which means that if you are in the habit of opening the file in an image editing program and then saving it somewhere else (rather than just moving the file or doing a copy/paste), you are loosing data as the already compressed image is subject to another round of lossy compression.





Similar Threads

  1. Adding A Pic To Your Post
    By ubeaut in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACK
    Replies: 34
    Last Post: 12th February 2010, 07:40 PM
  2. easiest way to resize images
    By Auzzie turner in forum NOTHING AT ALL TO DO WITH WOODWORK
    Replies: 19
    Last Post: 24th August 2006, 10:59 PM
  3. Shop made sliding mitre gauge
    By ArianAgain in forum HOMEMADE TOOLS AND JIGS ETC.
    Replies: 12
    Last Post: 16th December 2004, 03:01 PM
  4. Quality of tools
    By John Saxton in forum WOODWORK - GENERAL
    Replies: 10
    Last Post: 25th April 2002, 01:55 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •