Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: 6000 grit; where to now?
-
27th August 2011, 05:24 PM #1Rank Beginner
- Join Date
- Jun 2011
- Location
- Melbourne
- Posts
- 484
6000 grit; where to now?
Sharp at last!
After an enormous amount of time, effort and learning, I've finally managed to produce a chisel that I'd consider respectably sharp. Getting a bunch of fifty year old paint-tin openers to this condition, without using a powered grinder, has been an education.
However, that's only sharp to 6000 grit. I can still see very small scratches on my microbevel. And while I can shave with it, it's not something I'd recommend to my barber.
It must be sharper!
From here, my options are an 8000 waterstone, or MDF impregnated with Flexcut Gold, Veritas Green or something similar. (Hint: the MDF strop idea is about $100 cheaper). What do you recommend?Cheers,
Eddie
-
27th August 2011 05:24 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th August 2011, 05:55 PM #2
Where to now? Put them to some wood and bloody make something You use them to cut wood, not shave. 6000 is plenty.
Once you've worked them a while then decide if you need to go higher. Who knows, they might be crap chisels anyway.
-
27th August 2011, 06:55 PM #3Rank Beginner
- Join Date
- Jun 2011
- Location
- Melbourne
- Posts
- 484
-
28th August 2011, 09:05 AM #4SENIOR MEMBER
- Join Date
- Jan 2004
- Posts
- 686
Eddie,
Strop them as the final step.
Wipe both sides on a piece of paper, old piece of wood, etc... to remove the wire edge.
Here's how to sharpen a chisel once you've ground the primary bevel. It includes stropping.
(Sorry, at the end, I was off camera and still talking. Didn't realise.)
[ame=http://www.youtube.com/watch?v=JOYCRiiZOfw]Free Hand Sharpening of Chisels and Plane irons - YouTube[/ame]
Cheers,
eddie
-
29th August 2011, 12:53 AM #5Novice
- Join Date
- Feb 2006
- Location
- Melbourne
- Posts
- 24
I work up to 6000 grit with my waterstones, then finish with flex cut gold on some 18mm mdf (sometimes 3mm mdf scrap on the bench top at work for a quick touch up), it does make a difference and takes all of 20 seconds, probably less.
Liam
-
29th August 2011, 09:36 AM #6anne-maria.
Tea Lady
(White with none)
Follow my little workshop/gallery on facebook. things of clay and wood.
Similar Threads
-
Is a 300, 1000 and 6000 grit Japanese Whetstone enough?
By wsal in forum SHARPENINGReplies: 19Last Post: 9th January 2011, 04:09 PM -
Grit - Waterstone vs Wet/Dry
By mat in forum SHARPENINGReplies: 0Last Post: 12th March 2009, 09:37 AM -
Lapping grit on MDF
By GusG in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 11th April 2008, 10:59 AM -
What grit after scraping?
By Frithy in forum FINISHINGReplies: 8Last Post: 2nd August 2007, 09:48 PM