Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Veritas sharpening jig repair?
-
21st April 2005, 07:29 AM #1New Member
- Join Date
- Apr 2005
- Location
- Schnecksville, Pa
- Age
- 85
- Posts
- 2
Veritas sharpening jig repair?
I somehow lost or broke the E-clips(half moon clips?) that hold the roller to the shaft of the jig.
Tried using Standard sized E-clips from the hardware store, but the ones that fit the grooves on the shaft are too big and drag on the bench stone.
Could not locate the address or web site for the manufacturer using GOOGLE.
Can anyone help a newbie or suggest how to contact the manufacturer for parts?
Thanks,
Paco
-
21st April 2005 07:29 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
21st April 2005, 07:34 AM #2
Try e-mailing Lee Valley Tools. They are usually very helpful.
Rocker
-
11th May 2005, 09:25 AM #3New Member
- Join Date
- Apr 2005
- Location
- Schnecksville, Pa
- Age
- 85
- Posts
- 2
Lee Valley Service is tops
Rocker,
I followed your advice and sent an e-mail to Lee Valley tools. You were right. They were most helpful, making sure that the part was identified correctly, verifying my address and sending me the clips free of charge,although I'm not even a customer.
I received only one reply to my post and that's all I needed.
Thanks,
Paco
-
11th May 2005, 09:38 AM #4Senior Member
- Join Date
- May 2004
- Location
- Victoria
- Age
- 66
- Posts
- 242
If you go to your nearest bearing supplier they will have them for sure.
Sinjin
-
11th May 2005, 02:32 PM #5
Hi Paco
You only got the one reply because the advice you were given couldn't be bettered.
Rock on Rocker.Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.