Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 16
-
6th August 2006, 02:00 PM #1
The benefits of a sharp plane blade.
This morning I was shooting mitres on some Tassie Oak moulding I am using for my current project. I used my No. 8 plane with a freshly honed blade on the shooting board. I like using the No. 8 for shooting because the momentum generated by its weight means that it sails through whatever it is you are planing.
Attached are some pictures of one of the shavings that I produced. You can see that it is a perfect little slice of the moulding that I was working with. I measured the shavings with a vernier and they are only about 0.08mm thick.
You can see that even with a bevel down blade, provided that the blade is sharp, you can produce quite acceptable planed end grain.Regards,
Ian.
A larger version of my avatar picture can be found here. It is a scan of the front cover of the May 1960 issue of Woodworker magazine.
-
6th August 2006 02:00 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th August 2006, 05:38 PM #2
Hi Ian,
To get that 'slice' off in one piece on end grain is impressive.
I've never tried to use my #8 (with LN iron & chipbreaker) for shooting, but might just give it a whirl!
-
7th August 2006, 12:47 AM #3
The shavings came out all curly, but you could 'unroll' each of them to see a complete 'slice' of the moulding.
Regards,
Ian.
A larger version of my avatar picture can be found here. It is a scan of the front cover of the May 1960 issue of Woodworker magazine.
-
7th August 2006, 01:26 AM #4
Looks like you worked out what sharp really is...
Good, innit?
-
7th August 2006, 02:55 AM #5Originally Posted by SchtooRegards,
Ian.
A larger version of my avatar picture can be found here. It is a scan of the front cover of the May 1960 issue of Woodworker magazine.
-
7th August 2006, 08:38 PM #6
Poll ????
Is Mir showing off that he has mighty fine shavings or is he showing off that he has a Starrett vernier????
'You can't change the direction of the wind, but you can adjust your sails'
-
7th August 2006, 08:53 PM #7
If I'd wanted to gloat I would have mentioned that the No. 8 plane I was using to generate the thin shavings is a Lie-Nielsen. It was actually the shavings I was bragging about.
Regards,
Ian.
A larger version of my avatar picture can be found here. It is a scan of the front cover of the May 1960 issue of Woodworker magazine.
-
7th August 2006, 08:56 PM #8
Aaarghh Ian, now I really hate you An LN #8 indeed Burger!
-
7th August 2006, 09:05 PM #9
OK.....Mr Mirboo. esq. wins...I fold
Guess i'll just go back to the shed and talk nicely to my #5 Stanley
Does my Terry Gordon 3/4 Shoulder plane keep me in????'You can't change the direction of the wind, but you can adjust your sails'
-
7th August 2006, 11:07 PM #10Originally Posted by JaDBodgy
"Is it not enough simply to be able to appreciate the beauty of the garden without it being necessary to believe that there are faeries at the bottom of it? " Douglas Adams
-
8th August 2006, 12:08 AM #11
Aww... Come on guys. I wouldn't have mentioned the plane if not for JaD's little dig. Its the shavings I was bragging about.
JaD,
The Terry Gordon 3/4 shoulder plane is a very nice bit of kit. I checked one out at the last Sydney Timber and Working With Wood show.Regards,
Ian.
A larger version of my avatar picture can be found here. It is a scan of the front cover of the May 1960 issue of Woodworker magazine.
-
8th August 2006, 07:50 PM #12Originally Posted by Mirboo
Its such a handy little bugger for tenons,rebates and the like, among other uses, some he probably wouldn't like to know about and you can reverse the blade to use it as a scraper
He really does make some handy handsome planes'You can't change the direction of the wind, but you can adjust your sails'
-
9th August 2006, 12:35 PM #13
Yep I use my #7 for shooting for the same reason. Are you planing at 90 degrees to the grain or at 45 -- hard to tell from the photos.
Here's a challenge: get the same result on radiata!Those are my principles, and if you don't like them . . . well, I have others.
-
9th August 2006, 06:14 PM #14Originally Posted by Mirboo
But then I do have my Spiers Smoother replica to keep in the game
-
9th August 2006, 06:53 PM #15Originally Posted by zenwood
I'm tipping radiata pine would be a bit more tricky. I'ss see how I go next time I use some.
Steve, I do like your Spiers replica. I enjoyed the thread where you described assembling it.Regards,
Ian.
A larger version of my avatar picture can be found here. It is a scan of the front cover of the May 1960 issue of Woodworker magazine.
Similar Threads
-
Modifying a record 43 as a dovetail plane
By JDarvall in forum HAND TOOLS - POWEREDReplies: 27Last Post: 28th June 2006, 07:43 PM -
What do you use as Winding Sticks?
By derekcohen in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 17Last Post: 6th June 2006, 03:41 AM -
wooden dado planes
By JDarvall in forum HAND TOOLS - POWEREDReplies: 28Last Post: 15th December 2005, 06:29 AM -
Lie-Nielsen and the National debt.
By monoman in forum HAND TOOLS - UNPOWEREDReplies: 55Last Post: 31st August 2005, 07:43 PM -
Grinding (shaping) a blade for a scrub plane
By derekcohen in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 3Last Post: 17th May 2005, 03:14 PM