Results 1 to 10 of 10
  1. #1
    Join Date
    Apr 2007
    Location
    Sydney
    Posts
    749

    Default Fluid for waterstones - what do you use??

    I'm looking for a better option than plain old tap water for sharpening on water stones (the non-soaking variety) & diamond plates.

    It seems that HoneRite Gold is no longer available in Oz - PWS used to sell it, but no longer in their store. Advantage of this product is supposedly the rust inhibitors, surfactants to better carry away the swarf & it being widely used on water stones with no reported ill effects.

    Paul Sellers seems to favour using Auto Glass cleaner (as opposed to ammonia based household glass cleaners). This seems to be mainly isopropyl alcohol & water, with a very small amount of detergent.

    Some people seem to concoct their own mixtures - for example metho & a few drops of dishwash detergent dissolved in water.

    The metalworking fraternity have a variety of water based coolant additives for mills & lathes, but I can't see any reports of people using these with water stones.

    Ideally I would like something that has rust inhibitor properties.

    What (if anything) do you guys use other than plain water?

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jun 2005
    Location
    Helensburgh
    Posts
    7,696

    Default

    To ask the obvious, what do you see a different fluid's advantage over water? Diamond you can use just about anything because they are impervious to water and do not absorb fluid at all, water stones are another thing altogether, natural stones absorbing lots of water, ceramic I have seen described as splash and go.
    CHRIS

  4. #3
    Join Date
    Mar 2018
    Location
    Sydney
    Posts
    1,166

    Default

    Evian for my waterstones.
    Jokes !

    Waterstones only get water, even my expensive ceramic stones just get a splash but it's pure Sydney Tap, so we know it's good (except for that one time when the dead animals in Woronora Dam and cryptosporidium, but I digress).

    I've just been using windex on my new but cheap diamond sheets on glass, as per Sellers, not tried anything else...

  5. #4
    Join Date
    Apr 2011
    Location
    McBride BC Canada
    Posts
    3,543

    Default

    Just plain water up here.
    After 4K, I hone on AlOx/CrOx which has some sort of a waxy carrier.
    That's plenty for rust inhibition.
    Mind you, I've never has issues with high humidity, either.

  6. #5
    Join Date
    Aug 2008
    Location
    Melbourne
    Age
    34
    Posts
    6,127

    Default

    I'm with them, nothing wrong with standard water.

  7. #6
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    4,470

    Default

    They are called "water stones" for a reason

  8. #7
    Join Date
    Oct 2014
    Location
    Caroline Springs, VIC
    Posts
    1,645

    Default

    I have a spray bottle of water with a bit of dish washing soap in it to stop the water from growing algae. My chisels don't rust, except for when I use them as wet glue removers. My plane irons are dried off on my tshirt and allowed to rest on the bench for a second while I put stuff away. I would imagine that if I put the plane irons back into the plane with drops of water on them still, they would certainly rust.

  9. #8
    Join Date
    Oct 2009
    Location
    South Africa
    Posts
    950

    Default

    I’ve been known to mix a few drops of blood with the water, usually when the blade is getting nice and sharp.

  10. #9
    Join Date
    Apr 2001
    Location
    Perth
    Posts
    10,810

    Default

    My vote is WA tap water, room temperature, with a dash of liquid soap, and served in a small spray bottle.

    Regards from Perth

    Derek
    Visit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.

  11. #10
    Join Date
    Apr 2007
    Location
    Sydney
    Posts
    749

    Default

    Thanks for the replies. I'll add a few drops of detergent to my spray bottle & see if I notice better swarf removal.

Similar Threads

  1. Cutting Fluid Ratio
    By Kidbee in forum METALWORK FORUM
    Replies: 2
    Last Post: 26th August 2013, 11:52 PM
  2. Layout Fluid
    By m2c1Iw in forum METALWORK FORUM
    Replies: 25
    Last Post: 3rd January 2013, 01:49 AM
  3. Marking Fluid
    By grunto in forum METALWORK FORUM
    Replies: 81
    Last Post: 28th August 2012, 12:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •