Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 31 to 34 of 34
Thread: Hand Grinder Wheel Advice
-
19th April 2013, 09:02 AM #31Junior Senior Member
- Join Date
- Dec 2008
- Location
- Adelaide, SA
- Posts
- 962
Hand Grinder Wheel Advice
I think I've got this thing running relatively ok. I ended up using washers made out of cereal box cardboard. It still has a bit of a left-right wobble, but not too much. It does have an out of balance wobble tho, by at an estimate, is about 3mm. I have a feeling that's caused by my grinder and not from the wheel. Surely Nortons can produce a more round wheel than that.
Still may end up conceding the idea (as much as I don't like saying it!)
-
19th April 2013 09:02 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
24th April 2013, 12:49 PM #32Hewer of wood
- Join Date
- Jan 2002
- Location
- Melbourne, Aus.
- Age
- 71
- Posts
- 12,746
Well, it's been invaluable learning, no? For not much cost. And it's brought good reading to hundreds of us
Cheers, Ern
-
12th June 2013, 02:28 PM #33Junior Senior Member
- Join Date
- Dec 2008
- Location
- Adelaide, SA
- Posts
- 962
Hand Grinder Wheel Advice
A slight hitch (well in my OCD head that is!). I've had more of a look at this grinder. I do quite like it, but I've discovered that the spindle (right name?) is a bit bent. If you look at this pic:
ImageUploadedByTapatalk 21371007496.952257.jpg
The spindle with small gear is straight up to the point where it exits the grinder housing. From there to the thread it is bent.
Here's another pic:
I was thinking about seeing if someone can fix it on a metal lathe?
I know that I've talked about abandoning this idea multiple times, but it is really not going away!
Does anyone know someone who can do this without charging a lot?
-
18th August 2013, 11:05 PM #34
I know that you have moved on to your larger project but i found this resource which may help compensate for the side to side wobble you mentioned. Its for a bench grinder but should still work. The process involves using sticky dots to better align washers much like the cardboard.
Similar Threads
-
Getting and Using a Hand Cranked Grinder - Advice Please
By Russell Cook in forum HAND TOOLS - UNPOWEREDReplies: 8Last Post: 4th November 2012, 09:33 AM -
White Grinder wheel
By iron bark in forum HAND TOOLS - POWEREDReplies: 9Last Post: 19th January 2007, 10:20 PM -
grinder wheel formulation
By soundman in forum METALWORK FORUMReplies: 2Last Post: 16th June 2005, 01:10 AM -
Oval wheel on bench grinder
By gidgee in forum HAND TOOLS - POWEREDReplies: 3Last Post: 8th April 2005, 10:29 AM -
Grinder Wheel
By Termite in forum HAND TOOLS - POWEREDReplies: 13Last Post: 11th September 2003, 02:17 AM