Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Push Drill Fluted Bits
-
20th August 2013, 09:43 AM #1New Member
- Join Date
- Dec 2012
- Location
- Mineral Wells, TX
- Posts
- 9
Push Drill Fluted Bits
Good Day from North Texas,
I do not know if I am thinking to hard on this topic or not. I have never seen an article or instructions on how to sharpen push drill fluted bits? I tried using one of my bits and I think I would have started a fire by friction before I finished the hole. Can anyone help me out? I have attached a picture so ya'll know what I am talking about. Thanks, Chris
-
20th August 2013 09:43 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th August 2013, 02:10 PM #2GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
I have two of those drills, I believe that they belonged to my grandfather. So I'll guess 70+ yrs old. As I've kept the original bits, I pound out and file what I need from coat-hanger wire. Kind of use it and toss it.
1. I don't believe that you have to fool with the flutes.
2. You need to figure out what the bevel angle needs to be for a cutting edge.
3. I'll make a wild guess and say 30 degrees (like a woodworking chisel).
= = =
If you touched it up, very, very gently, to 30 and try it and tell us all.
If I had to make a second guess, 25 degrees like a good cabinet maker's skew.
-
20th August 2013, 04:10 PM #3
They look very similar to what is used in a Stanley "Yankee" screwdriver (the precursor to the modern cordless drill!).
You should be able to touch them up on a grinder basically the same as you would hand sharpen a normal twist drill.
Alternatively, if they are the same as the Yankee bits then new ones are available.
Similar Threads
-
Pouch for a push-drill
By ivanivan in forum HAND TOOLS - UNPOWEREDReplies: 1Last Post: 7th September 2012, 11:20 PM -
Archimedean Push Drill
By annehns in forum HAND TOOLS - UNPOWEREDReplies: 4Last Post: 21st April 2012, 12:27 AM -
Drill Bits
By Matt88s in forum WOODTURNING - PEN TURNINGReplies: 6Last Post: 9th May 2007, 07:47 AM -
Impact Drill - Damaging drill bits
By BassTeQ in forum HAND TOOLS - POWEREDReplies: 18Last Post: 9th September 2005, 10:16 PM