Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Tormek Turning kit
-
27th December 2012, 05:41 PM #1
Tormek Turning kit
Hi,
My wife bought me for Christmas the complete turning sharpening kit for my Tormek T3 which I am looking forward to using.
However on trying to put the additional honing wheels along side the standard flat honing wheel I cannot work out how they attach to the main Tormek shaft.
There is a small shaft supplied with the kit which I have managed to place the honing wheels onto in the correct order from what i can see, however the problem is how this then attaches to the shaft of the Tormek? I have reviewed some videos and tried to find out info on this with one video showing what may be wrong.
It would appear that the shaft supplied in the kit is not drilled and tapped so it cannot be attached to the main shaft of the Tormek placing the additional honing wheels along side the flat honing wheel.
Can someone please advise if this is the case.
Much appreciated
Tony.
-
27th December 2012 05:41 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
29th December 2012, 11:48 PM #2
It was as noted !! the extra shaft supplied for mounting the additional honing wheels had not been drilled and tapped.
Carbatec replaced the shaft when visiting today, whilst purchase my new Biese Clamps )
Cheers
Tony.
Similar Threads
-
Tormek T3 or T7 ?
By Geekgirl in forum SHARPENINGReplies: 7Last Post: 30th July 2012, 01:30 AM -
Tormek now at LV
By wolften in forum SHARPENINGReplies: 10Last Post: 31st August 2011, 03:10 AM -
Tormek T3 v T7
By Virgil in forum SHARPENINGReplies: 3Last Post: 6th November 2009, 08:23 AM -
Tormek v jet
By kmthor in forum SHARPENINGReplies: 5Last Post: 20th May 2008, 05:08 PM -
Tormek
By TheBigBJ in forum WOODTURNING - GENERALReplies: 4Last Post: 16th July 2003, 11:04 PM