Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Using diamond plates
-
27th October 2015, 05:18 PM #1Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,470
Using diamond plates
What are the thoughts from the forumites:
- do you use diamond plates dry or with water or doesn't it matter?
There are different views on Google
cheers
-
27th October 2015 05:18 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th October 2015, 07:49 PM #2Chainsaw carpenter
- Join Date
- Jul 2015
- Location
- Canberra ACT
- Posts
- 111
I prefer to use window cleaner, soap acts as lubricant and surfactant, lubricant helps get a "polished" finish and surfactant makes solution adhere to the surface better. Saw it on Youtube somewhere and tried it, i reckon it is a better option than water. Dry doesn't feel right to me. Try each method, water and window cleaner won't hurt your plates. Nothing like personal experience from experimenting to validate advice.
-
27th October 2015, 09:54 PM #3Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
+1 for water
-
27th October 2015, 11:26 PM #4GOLD MEMBER
- Join Date
- Jun 2014
- Location
- Seattle, Washington, USA
- Posts
- 1,857
I use water and have had good results. I have seen Paul Sellers use window cleaner, and I would like to try it, but I'm having no problems with water so I kind of see it as an extraneous expense.
Some people use saliva.
It's really hard for me to see any advantage to using them dry, aside from the elimination of a potential liquid mess. Any argument that you should keep your blades away from moisture is a bit silly. Just wipe them off well afterwards. I've never had a problem with blades rusting at the cutting edge because they were wet from being sharpened.
Cheers,
Luke
-
27th October 2015, 11:28 PM #5GOLD MEMBER
- Join Date
- Jun 2014
- Location
- Seattle, Washington, USA
- Posts
- 1,857
Further to my previous post, when I say I use water, I'm talking about a few drops. Like half a squirt from a squirt bottle. Just enough to cover the path of the blade while sharpening. Not even enough to run off the edges of the stone.
-
28th October 2015, 02:59 AM #6GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
The liquid, whatever you like, is the vehicle to carry away the swarf. Each of my stones, both oil and water, sits in its own little cage.
Of course it's sloppy = I don't care, the edge is all that matters to me.
Most of the time, to do adzes and crooked knives with sweeps, I use whatever curved surfaces seem adequate with fine automotive sandpapers (dry)
wrapped around them. Box card and CrOx/AlOx for honing.
-
28th October 2015, 09:18 AM #7
Hi I use cheap windex as I have found its the best at speeding up the cut and clean all my diamond stones off with Ajax and dry off to stop the swarf from rusting.
Cheers
Sent from my iPhone using Tapatalk
-
28th October 2015, 01:25 PM #8SENIOR MEMBER
- Join Date
- Jan 2004
- Location
- Bellingen
- Posts
- 587
I use turps....never had a problem on eze lap brand stones except the little pocket hones on a stick... The glue melted but I just stuck it back on.
Similar Threads
-
Considering a switch to Diamond Plates
By Luke Maddux in forum SHARPENINGReplies: 67Last Post: 17th April 2019, 01:00 AM -
Norton diamond plates
By sinjin in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 5th July 2008, 06:31 PM -
Diamond sharpening plates
By jow104 in forum SHARPENINGReplies: 14Last Post: 2nd May 2005, 11:13 AM -
Diamond Plates
By silentC in forum WOODWORK - GENERALReplies: 29Last Post: 14th April 2005, 04:42 PM