Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
-
18th September 2005, 09:39 AM #1
Could you get by with 1 nail gun?
Hey all,
In a previous post I contemplated getting the new GMC framing gun. After speaking to Bunnies, I find out that in general, even though the capacity is 50 to 90 mm nails, they really only sell up to 75mm.
I have always fancied one of the Paslode airless fixing guns which have a capacity of 35 to 65 mm. I wonder if I can get away with a fixing gun to do my framing as we are only talking about losing a 10mm capacity (75 - 65mm). The gauge may not be sufficient for framing on the Paslode fixing gun and therefore I would have to get 2 guns. At the moment I have a 40 litre air compressor but it's a hassle with the hose etc.
It would be nice just to have to worry about where to nail when I'm on the roof rather than worry about where the hose is.
The cost of the airless guns would make anything other than 1 gun prohibitive, so what do you think?
-
18th September 2005 09:39 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
18th September 2005, 12:11 PM #2
Fixing guns are designed with thin nails 1.6 - 1.8mm and with a small head that can be covered over with filler.
Framing nails are ususlly 3.2mm or larger and have a flat head .
So no you should not use a fixing gun for framing.
In saying that there is nothing to stop you doing that but I would certainly not like you to build my house with a fixing gun.
75mm framing nails are the most comonly used and priced accordingly other sizes are available but considerably dearer.Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
18th September 2005, 05:50 PM #3Hammer Head
- Join Date
- Jan 2005
- Location
- Sydney
- Posts
- 1,205
fixing gun to do my framing
those little fixing nails hold bugger all,
May be get Gas framer and air bradder if its cost you are concerened about.
-
18th September 2005, 11:23 PM #4
Q. Could I get by with 1 nail gun?
A. No. I've got seven and that's barely enough
Work out what your going to do most and then let us know so we can help you spend your money. The gasless guns are a pretty expensive option, you could probably buy a decent framer and finisher for around the same dollars. I've never had a problem with the airline when on a roof, if anything it's handy as you can hoist the gun up/lower it down on the hose.
Mick"If you need a machine today and don't buy it,
tomorrow you will have paid for it and not have it."
- Henry Ford 1938
-
19th September 2005, 12:07 AM #5
The boys are right.
If you are a hobbyist, the gasless guns are not the way to go. Im told they need to be used regularly (I own both of them). My tip, buy a 'C' class finisher and a framing air gun.
I will shortly be buying my 7th gun, a coiled nailer. Does that give you an idea as to how I would answer your question in one word?
-
19th September 2005, 10:26 AM #6
Gentlemen, I suspected you would say what you've said. A nail gun is an expensive outlay if you only use them occassionally. I suspected that the gauge for a fixer wasn't going to do the job for framing a house, but was hoping I could get away with it for a chook house and the like. I'll have to reevaluate my priorites and anyway there's always hammers. Anyone know where I can get a good framing hammer from?
-
19th September 2005, 10:28 AM #7
Boban,
BTW, I thought that a bradder, fixer and framer would cover you for every job. You mentioned that you had 7 guns, are you suggesting that you need more than the common 3 guns for household jobs?
-
19th September 2005, 12:20 PM #8Retired
- Join Date
- May 1999
- Location
- Tooradin,Victoria,Australia
- Age
- 73
- Posts
- 11,918
Originally Posted by Tiger
At last count I had 9 but I do a lot of different stuff.
-
19th September 2005, 10:14 PM #9Originally Posted by Tiger
Similar Threads
-
Nail gun, nail sizes?
By Santalum in forum HAND TOOLS - POWEREDReplies: 1Last Post: 13th September 2005, 11:33 AM -
Nail Gun?
By sander in forum HAND TOOLS - POWEREDReplies: 11Last Post: 19th March 2005, 11:47 AM -
Nail gun advice,
By Zed in forum HAND TOOLS - POWEREDReplies: 16Last Post: 21st January 2005, 10:54 PM -
Which compressor and nail gun would you buy...and why?
By kando in forum HAND TOOLS - POWEREDReplies: 14Last Post: 14th January 2005, 12:35 PM -
Review of el cheapo nail gun
By rodm in forum HAND TOOLS - POWEREDReplies: 29Last Post: 17th December 2003, 10:12 PM