Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 2 of 2 FirstFirst 12
Results 16 to 21 of 21
  1. #16
    Join Date
    May 2006
    Location
    Sydney
    Age
    48
    Posts
    256

    Default

    Thanks for all the input - there are many ideas for me to consider...

    Had a great day at the timber yards yesterday. Was trying to buy coolibah but struggled to get it. Ended up going to ironwood in lilyfield and got some dressed recycled spotted gum. Very nice grain features with a few borer holes etc so will look good. Only cost me $400, so happy with that. I'll post the pictures as I start. Pretty impressed by the selection of timber there as well, so I think it could become my favourite timber yard.

    I've already got a very sturdy bench, with 30mm or so thick plywood top bolted on to 4x2 posts, so don't need that. One thing I forgot to mention was that I have built a fair portion of the furniture in my house already, so this is the second round of building, as the last lot was built with pine/mdf 10 years ago. Practiced a couple of m&t joints late yesterday and happy with the results.

    In terms of justifying the timber, comparing it to ikea is not relevant in my case. Sure you can buy a mdf/melamine table for $100 but I'm not building one of those. I'm comparing a solid timber table with m&t joints and dovetailed drawers, which probably cost close to $1k, and is not as well made. I'm doing it for the enjoyment and the quality. So I think I can justify half the savings to spend on tools (that's my rule of thumb anyway).

    One thing a couple of people have suggested is a dust collection system, which I did not think about. This has risen to the top, so will get one today. DIYDAN's sounds like a good idea, my folks live in st ives so I'm often around the area, although it's a little far from the inner west.

    I reckon I can build the coffee table without the domino, so I will have a go at justifying it with the savings from the dining table yet to be made in a month or so..

    Cheers,

    Tom

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #17
    Join Date
    Jan 2008
    Location
    NSW southern Highlands
    Posts
    548

    Default

    DSC_0001.jpg

    Tom

    I suggest

    Buy a Domino, they are expensive but, will do the work of a biscuit joiner, and much more

    Buy a larger hand plane which can be used to prepare components and also as a shooting board plane

    Buy a 14 " bandsaw which is much safer to use than a table saw , and takes up less space. I find with mine I can get a finish cut which only needs a swipe or two of a hand plane and it is ready to apply finish.

    To give you an Idea of what can be accomplished, on the above chair I cut the components from boards I dressed on the planer thicknessor. ( you could buy boards dressed by Others )

    I cut components such as rails, legs, and veneers for the back splats, and curved rails on the bandsaw, and dressed these with hand planes and spokeshaves. most of the joints were done with the Domino.

    Each of the Backsplats were made of three veneers cut on the Bandsaw, glued on a former then dressed with spokeshaves.

    If you are planning to make lots of a particular item and design, then machinery is very useful but you need lots of space in the workshop. If you plan to make smaller quantities I find handtools are often quicker and certainly more enjoyable to use.

    Enjoy

  4. #18
    Join Date
    Feb 2003
    Location
    back in Alberta for a while
    Age
    68
    Posts
    12,006

    Default

    10 years on, we really should be asking Tom how his furniture builds went.












    I almost fell into the same trap.
    regards from Alberta, Canada

    ian

  5. #19
    Join Date
    Nov 2006
    Location
    Bendigo Victoria
    Age
    80
    Posts
    16,560

    Default


  6. #20
    Join Date
    Jan 2008
    Location
    NSW southern Highlands
    Posts
    548

    Default

    Correct, I knew that, and was just testing to see if anyone would spot it.

    Or just maybe I am slowing down a Tad

    Cheers

  7. #21
    Join Date
    Jan 2007
    Location
    Katoomba NSW
    Posts
    4,770

    Default

    And Tom hasn't been on the forum for 2 years. We will never know. Probably bought a Domino then couldn't afford the internet.
    Those were the droids I was looking for.
    https://autoblastgates.com.au

Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •