Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: Accurate drop saw required
-
12th June 2006, 09:10 PM #1Novice
- Join Date
- Dec 2004
- Location
- Hornsby (Sydney)
- Posts
- 15
Accurate drop saw required
I'm in the market for a drop saw which is very accurate. Want to get into picture framing and similar small mitering work. Years ago had an Elu, which a combo saw, either a drop saw or flip it over and it becomes a small table saw. It was the most accurate saw I have ever used but alas are no longer available:mad: Have tried a compound Makita - hard to adjust the blade to 90 & 45 degrees accuratley. Something with a quite induction motor and one that can easly be adjusted would be prefered. Can I pick your brains please?
Phill
-
12th June 2006 09:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th June 2006, 09:36 PM #2
For picture framing an elcheapo drop saw or even a handsaw and a mitre box is good enough.
BUT you do need a mitre guillotine,
OR a razor sharp handplane and a mitre shooting board.
-
12th June 2006, 10:54 PM #3Originally Posted by pwill
http://www.dewalt.com.au/products.as...cketid=9&sid=1"the bitterness of poor quality is remembered long after the sweetness of low price is forgotten"
-
12th June 2006, 11:09 PM #4GOLD MEMBER
- Join Date
- Jan 2006
- Location
- Bowral, NSW, Australia
- Age
- 74
- Posts
- 1,471
Originally Posted by pwill
Carry Pine
-
12th June 2006, 11:10 PM #5
The metabo (previously electra bekam) 10" direct drive induction motor.
I have one several mates have them.
Fit it with at least 80t aluminium cutting blade & you will be away.
This saw has been round for donkeys and was one of the first slide compound units on the market.
lovely machine I use mine for accurate cutting of aluminium extrusions .
picture framing is only a little less demanding.
This saw has been popular in the aluminium industry for ages.
With the aluminium balde you will get near enough to no chip out on your prefinished mouldings and an almost polished endgrain finish.
cheersAny thing with sharp teeth eats meat.
Most powertools have sharp teeth.
People are made of meat.
Abrasives can be just as dangerous as a blade.....and 10 times more painfull.
-
13th June 2006, 05:04 AM #6
Echnidna already gave you the best option. Get a mitre guillotine. Dead accurate, doesn't need a motor as it is foot or arm driven and doesn't need adjusting.
Bob Willson
The term 'grammar nazi' was invented to make people, who don't know their grammar, feel OK about being uneducated.
-
13th June 2006, 05:27 AM #7Originally Posted by soundman
Can you let me know the model? I've got a Metabo drop saw (KGS 1670 S) but it was never an Elektra Beckum. Which saw do you mean?
Attachment 24880
As for Carpenter's info on the DeWalt, just 'cause it looks the same don't mean it is. I think it was Carpenter himself who backed up my story that the DeWalts don't even have soft-start? Perhaps it is only some models...
DamienIs it wrong to be in love with a sawbench?
-
13th June 2006, 10:58 PM #8Originally Posted by damienhazo"the bitterness of poor quality is remembered long after the sweetness of low price is forgotten"
-
13th June 2006, 11:43 PM #9Originally Posted by Carpenter
Different machine? Still doesn't change the fact that people have replaced ageing Elu machines with the 'rebranded-only' DeWalt machines, only to be dissapointed...Is it wrong to be in love with a sawbench?
-
14th June 2006, 01:23 AM #10
Second (or is it third) what Bob Thomas said
For dead on accurate (for picture frames) get a good mitre guillotine (not a cheapie)
A shooting board and hand plane is too slow unless you're only doing a few.
-
15th June 2006, 12:19 AM #11
The metabo model I refer to is the KGS301 or KGS331(with extras).
Unless you are planning to do heaps of picture framing I see a mitre trimmer as a complete wast of time.
Even then there are heaps of commercial framers who do not use mitre trimmers they depend on a decent mitre saw.
believe me getting aluminium extrusion to mate prpoerly at a mitre is more demanding than picture framing.
cheersAny thing with sharp teeth eats meat.
Most powertools have sharp teeth.
People are made of meat.
Abrasives can be just as dangerous as a blade.....and 10 times more painfull.
-
15th June 2006, 09:29 AM #12
Thanks for the reply Soundman - and for what it's worth...I believe you about the mitre joins.
Is it wrong to be in love with a sawbench?
Similar Threads
-
accurate cutting woes
By dzuy in forum WOODWORK - GENERALReplies: 10Last Post: 8th June 2006, 09:56 PM -
Drop leaf table
By Cagey in forum WOODWORK - GENERALReplies: 1Last Post: 5th April 2006, 02:27 PM -
accurate wood turning
By redmond in forum WOODTURNING - GENERALReplies: 44Last Post: 2nd June 2004, 01:08 PM -
Me gold member is about to drop off!!!
By ozwinner in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 13Last Post: 28th May 2004, 10:49 AM -
How Accurate???
By Vonrek in forum TRITON / GMCReplies: 23Last Post: 28th April 2002, 11:34 PM