Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: advice on hitachi planer blades?
-
17th May 2010, 05:36 PM #1Novice
- Join Date
- Mar 2009
- Location
- Blue Mountains
- Posts
- 18
advice on hitachi planer blades?
Hey i'm just wondering if anyone can give me some guidance with blade placement for a hitachi planer- it is on 'long-term borrow' to me, and therefore came with no instruction booklet! (thanks dad). The blades are double sided and so i have rotated them but i am assuming there is a bit of a rule of thumb with how far the blade edge should overhang the plate it is fixed to...? Logic tells me that it should only be a matter of 1 or 2 mm, or the max depth i will likely plane, yet being a bit of a stooge i'd rather get some advice than have to shell out on new blades if i stuff these ones!
-
17th May 2010 05:36 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
17th May 2010, 06:17 PM #2
Blades should be aligned to be flush with the rear base of the planer (for a hand planer) or the outfeed table (for a jointer/buzzer). Then the depth of cut is set by adjusting the lead in base or infeed table to expose the required amount of blade for the chosen DOC.
When setting the blades, you need to get them set evenly accross their width, relative to the base or table, i.e cutting evenly accross the width of the cutter head.
-
17th May 2010, 06:28 PM #3
There is a good video on this by Marc Spagnuolo, the Wood Whisperer, just follow this link
Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
17th May 2010, 08:23 PM #4Novice
- Join Date
- Mar 2009
- Location
- Blue Mountains
- Posts
- 18
thanks for the quick replies! it's planely obvious now its been pointed out... appreciate the help. If you have any tree-climbing/tree removal questions, i'm your man!
Similar Threads
-
A gripe about spare parts for my Hitachi planer
By IanW in forum WOODWORK - GENERALReplies: 9Last Post: 6th February 2024, 02:05 AM -
aligning planer blades
By sosman in forum HAND TOOLS - POWEREDReplies: 3Last Post: 9th February 2010, 07:32 PM -
Planer blades for Wolf Planer
By viiking in forum HAND TOOLS - POWEREDReplies: 1Last Post: 16th January 2009, 10:17 AM -
New Planer blades needed - help
By Scribbly Gum in forum HAND TOOLS - POWEREDReplies: 0Last Post: 4th December 2008, 07:29 PM