Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Bearing supplier wanted.
-
5th January 2007, 01:51 PM #1
Bearing supplier wanted.
I've searched through the forums but haven't been able to track down a bearing supplier for the headstock bearings on my Jet 1621 (or is that1261, can't remember). Anyway, my Jet lathe. I get a screeching sound and vibration from the headstock when I'm hollowing chuck mounted pieces, and also when I'm putting a bit of pressure on while sanding. Take the sandpaper off and the noiise stops, so I'm guessing bearings. I got it about 6 months ago second hand, and it had been idle for a number of years prior to that, so a bearing replacement might be a good idea anyway.
So can anyone point me to a supplier in Melbourne who will have the Jet bearings, or will they be generic and available at most bearing suppliers.
-
5th January 2007 01:51 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
5th January 2007, 03:46 PM #2
Probably generic. All you need is the bearing dimensions and you'll be away.
Try the NSK range. Victorian outlets are listed http://www.nskaustralia.com.au/Nskau...aspx?State=VIC
Otherwise give LEDA in Adelaide a call http://www.ledamachinery.com.au/Ours is not to reason why.....only to point and giggle.
-
5th January 2007, 03:51 PM #3
Let your fingers do the walking.
They use standard bearings that you will pick up at any bearing supplier and probably cheaper than Jet originals.Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
6th January 2007, 09:28 PM #4
Thanks Jim, Silent. I'll hunt out a supplier locally. Glad to hear it shouldn't be a problem.
Similar Threads
-
Clear oregon supplier wanted
By bloggs1968 in forum BOAT RESOURCES / PRODUCT SEARCHReplies: 2Last Post: 3rd March 2006, 11:35 PM -
Clear oregon supplier wanted
By bloggs1968 in forum TIMBERReplies: 2Last Post: 3rd March 2006, 05:57 AM -
Thrust bearing for BAS450
By CameronPotter in forum BANDSAWSReplies: 5Last Post: 27th November 2005, 07:10 PM -
supplier wanted
By rick_rine in forum WOODWORK - GENERALReplies: 1Last Post: 12th October 2005, 01:08 AM -
Timber Supplier information wanted Melbourne South Eastern Area
By Garry1953 in forum TIMBERReplies: 5Last Post: 26th December 2003, 04:41 PM