Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Blast gates
-
19th September 2003, 09:19 PM #1
Blast gates
Steve,I have ducted all my machines and have put blast gates close to the machines purely on the basis that as a matter of convenience.
As the ducting is mounted off of the ceiling I saw no point in having the gates out of reach and as a consequence have not discerned any loss in performance in achieving the removal of chips/shavings/dust.
The one factor in all this is to provide gates at all points if necessart to maintain the effectiveness of your dust extractor.
Just my view
CheersJohnno
Everyone has a photographic memory, some just don't have film.
-
19th September 2003 09:19 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
19th September 2003, 09:25 PM #2
my apologies ...this should have been posted under Steve's Blastgate Placement posting.
Johnno
Everyone has a photographic memory, some just don't have film.