Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
18th April 2011, 09:48 PM #1New Member
- Join Date
- Apr 2011
- Location
- down under
- Posts
- 2
Opening a bosch 9.6V GSR battery case
Hi All
I'd like to replace my cells in a bosch 9.6V NICD battery, as it's now completely dead.
I tried opening the case, but found it only got 3 screws which open up easily, but there's a seal in the 4th corner, which i don't know how to handle. Please see attached photo, in the bottom right.
Can someone please advise on how to open the case, and then be able to close it up again, after I replace the NICD cells ?
thanks bbosch
-
18th April 2011 09:48 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
19th April 2011, 05:04 PM #2Senior Member
- Join Date
- Jun 2005
- Location
- Sydney
- Posts
- 295
I have that same battery. from memory it;'s jsut a plastic cap, with the screw underneath. I just drilled out the plastic
-
20th April 2011, 05:46 AM #3New Member
- Join Date
- Apr 2011
- Location
- down under
- Posts
- 2
This is exactly what I finally did. The screw is right under the plastic seal.
thanks
Similar Threads
-
can i charge a dry battery with a wet battery charger?
By weisyboy in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 2Last Post: 5th April 2009, 10:24 PM -
Bosch vs Bosch Professional?
By Starmage in forum HAND TOOLS - POWEREDReplies: 7Last Post: 8th December 2008, 02:33 PM -
opening jpg
By Greg Ward in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 3Last Post: 10th February 2008, 12:21 AM -
Now opening
By Allan at Wallan in forum WOODIES JOKESReplies: 3Last Post: 7th November 2007, 10:00 PM -
Bosch Cordless 36V Drill - and a pat on the back for Bosch
By Clinton1 in forum HAND TOOLS - POWEREDReplies: 0Last Post: 6th March 2007, 04:15 PM