Thread: Bosch GOF 1300 ACE ADjustments

Have you seen this thread - GOF 1300 ACE Height adjustment problems Since you've got it in a table do you need the return springs? can you remove them?

Oh oh, and this one - Questions on hand-me-down BOSCH GOF 1300 ACE router

The advice on the threads that aldav linked to should give the answers to your locking question by moving the plastic lever to a new position. Just be careful if moving the lever. After you remove the retaining screw hold the lever firmly as you pull it off the hex headed locking bolt as there is a spring behind it which will try to turn the lever anticlockwise. Just pull it out far enough to get it off the head and then rotate the lever to the right until you can maneuver it back on to the next position on the hex. Once on, just put the screw back in. As for the fine adjustment knob, it only has about 8 turns from one end of its stroke to the other, it is not infinitely variable. What you may have done is screw it hard up against one end of the stroke. When you get it free it would be a good idea to set it at about the half way point of 4 turns. The fine adjuster will still work when the main lock is engaged.
Parts list