Needs Pictures: 0
Results 76 to 85 of 85
-
6th March 2017, 02:04 PM #76Intermediate Member
- Join Date
- Oct 2005
- Location
- Sydney
- Posts
- 49
TTiT,
Is there any chance you could provide a link to where you bought the spindle -- it looks like exactly what I'm after.
Thank you.
-
6th March 2017 02:04 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th March 2017, 11:01 PM #77
I did ask Michael but all he could tell me was that it was one of those Chinese sites - he reckons they were all selling much the same thing for much the same price but couldn't remember which site exactly.
A quick Google came up with this one which looks exactly like the kit we got . . . CNC 2.2KW Spindle Motor + Frequency inverter VFD + Mount + ER20 Collet + pump | eBay
-
7th March 2017, 08:45 AM #78Intermediate Member
- Join Date
- Oct 2005
- Location
- Sydney
- Posts
- 49
Thanks again!
-
13th March 2017, 11:51 PM #79GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
-
14th March 2017, 07:06 AM #80Intermediate Member
- Join Date
- Oct 2005
- Location
- Sydney
- Posts
- 49
a big +1.
-
15th March 2017, 11:49 PM #81
-
17th March 2017, 08:57 PM #82
On time for once
Pic 1. What I've attached to the extension table to set it up - fixed base, switch (after several years without it!), brace and my home-grown extraction adapter.
Pic 2. Table top - has a hole for the allen-key lift but I've never used it - you have to unlock the spindle anyway so its easier to use the micro-adjuster and the 3 quick-stops to adjust it from below.
Pic 3. The whizz-bang extractor connection.
Pic 4. All hooked up
Pic 5. With the sliding table in front, it isn't much different to any other router table but also has the added advantage of the sliding table.
-
18th March 2017, 08:05 PM #83Senior Member
- Join Date
- Dec 2004
- Location
- Perth
- Posts
- 324
Ooooooo I like that. Looks like it comes apart fairly easily. Great use of that little end table
-
18th March 2017, 08:28 PM #84GOLD MEMBER
- Join Date
- Jun 2005
- Location
- Helensburgh
- Posts
- 7,696
Thanks for that, more food for thought. Using a spindle it might be possible to get the cutter closer to the table, do you use the sliding table for routing to push the timber past the cutter?
CHRIS
-
19th March 2017, 12:14 AM #85
Takes about 20 seconds - one wingnut on the brace and the whole things lifts off slotted holes.
Whenever the piece I'm working on is big enough to reach the slide I clamp it down - a lot less effort required and keeps the pinkys well clear of the pointy bits!
Similar Threads
-
Bosch Router with built in Router Lift
By TP1 in forum ROUTING FORUMReplies: 5Last Post: 8th March 2010, 02:22 PM -
Bosch Palm router for router table?
By bbdog in forum ROUTING FORUMReplies: 1Last Post: 11th May 2009, 11:42 AM -
New Bosch 2-in-1 router.
By CT in forum ROUTING FORUMReplies: 2Last Post: 15th May 2006, 05:25 PM -
Bosch saw & router
By DPR in forum TRITON / GMCReplies: 8Last Post: 2nd December 2004, 11:07 AM