Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 16
Thread: Chuck key holder
-
4th April 2011, 01:36 PM #1
Chuck key holder
I finally got around to making a cupboard to hold some of the paraphenalia & multiple sets of drill types that has sat in drawers or piled on any flat surface beside the drill press. I intended to add a spring-clip holder for the chuck key, which always gets itself lost during extended drilling procedurees. Now I know I have a couple of spring-clip chuck key holders somewhere in the shed, but after turning the place upside down yesterday, I could not lay my hands on one. Looking at a recycled roller catch, I thought it might just do the trick. I had to file a notch in the bottom mounting flange to allow the bar to fit straight, and it needed a bit of imagination to mount it on the door where I wanted it, but it works so well, I don't care if the other key-holders stay lost.
I'm sure I'm far from the first to think of this, but I was still pleased with myself for coming up with my solution..
Cheers,IW
-
4th April 2011 01:36 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
4th April 2011, 02:21 PM #2Senior Member
- Join Date
- Sep 2007
- Location
- Country West Oz
- Age
- 77
- Posts
- 201
I like it
Regards
Bradford
-
4th April 2011, 02:30 PM #3
Now that is a great idea
I've always just left it sitting in the sliding vice all this time (as my Dad did before me) and it's never disappeared yet - but might one day, I'm going to borrow that one.
-
4th April 2011, 05:14 PM #4
Great cupboard Ian,
And very good solution to the always missing chuck-keys.
I've use an old large speaker magnet on the front of the pulley cover.
Cheers, Crowie
-
4th April 2011, 05:20 PM #5
-
4th April 2011, 05:28 PM #6
G'Day Ian,
It quite a strong magnet that stays up high on the pulley cover.
It's about 3" dia with a 1" hole which is the right size to locate the gear on the key.
It's way out of the road of the chuck and the drill table.
Cheers, Crowie
-
4th April 2011, 08:09 PM #7
Great idea Ian! Its these always simple, overlooked cool solutions I love.
Nathan.
-
5th April 2011, 07:52 PM #8Been here a while
- Join Date
- Feb 2004
- Location
- Victoria
- Posts
- 345
I also use them for screwdrivers and similarly shaped objects, not just tools, but pretty much anything that you push in / pull out from the front without needing to find a hole.
-
6th April 2011, 06:47 AM #9Member
- Join Date
- Nov 2005
- Location
- Kihikihi, TeAwamutu
- Age
- 80
- Posts
- 98
I have a rare earth magnet, from an old computer hard drive, glued to the top of the pulley cover that holds my chuck key.
It's so strong that you can almost throw the key toward the magnet and it grabs it.
-
6th April 2011, 09:18 AM #10Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
-
6th April 2011, 01:28 PM #11
My solution of not losing the chuck key is to hang it on a piece of chain on the side of the drill press and on the other side I have another chain that holds the drift wedge to remove the chuck from the quill.
-
7th April 2011, 12:17 AM #12
-
7th April 2011, 08:54 AM #13
Nice idea.
-
7th April 2011, 09:21 AM #14
Neat idea
My drill press came with a little spring clip on the side of it (slightly hidden) for holding the chuck key, which I never seem to use. One fine morning in the shed I was hunting for the stupid thing for ages... finally found it in it's holder
at least with your one you can see if it's in there straight away.
Cheers,
Dave
-
7th April 2011, 09:54 AM #15
Yep - that was precisely the idea, Dave. I discovered quite a while ago (but long after I should have! ) that having an obvious place for everything is a necessity for me. My tool drawers & hanging spaces have holders & cutouts to match the tools that should be there. I don't know how many times I have spotted an empty space where something should be whilst cleaning up at the end of the day & found it in the shavings. If it hadn't been for that empty spot shouting at me, it might have gone to the compost pile, or worse...
Living in a small shed encourages me to put things back in their place as soon as I finish with them, but lots of tools are needed over & over, so the clutter still mounts on benctops & any other flat surface as the day goes on. My last 'shed' was a work area a quarter of the size of my current space, and I was a lot more careful, there. Having more space seems to encourage more sloppy work habits - I'm trying to re-train myself.
Cheers,IW
Similar Threads
-
ER11 Collet Chuck Holder
By triden in forum CNC MachinesReplies: 5Last Post: 21st November 2010, 12:14 PM -
150/3 Holder?
By Lignum in forum FESTOOL FORUMReplies: 7Last Post: 21st October 2009, 07:24 AM -
Pot Plant holder ????
By Kev da Fridgee in forum BOAT BUILDING / REPAIRINGReplies: 6Last Post: 29th March 2009, 11:19 PM -
magazine holder
By al2 in forum BOX MAKINGReplies: 6Last Post: 21st February 2008, 11:59 PM -
Which beginners chuck should a woodchuck chuck
By dazzler in forum WOODTURNING - GENERALReplies: 16Last Post: 2nd July 2006, 10:58 PM