Results 1 to 13 of 13
  1. #1
    Join Date
    Jun 2003
    Location
    Brisbane, Qld
    Posts
    939

    Default Cordless reciprocating saw experience?

    Hi folks,

    I have a cheap Ryobi one+ reciprocating saw, and find myself reaching for it fairly often for rough cuts - however, it’s pretty gutless (as you would expect for a saw that I think cost me $100).

    Thinking of replacing it and relegating the ryobi to trimming the garden (which it’s great for) - anyone got a reciprocating saw they particularly like?

    I have a bit of a collection of one+ gear and I like it for the most part, so the ryobi brushless is a strong contender - anyone tried one? What did you think?

    I’m considering switching from one+ to a higher-end 18V system (Milwaukee/marital/desalt/Bosch blue/hitachi/whatever), so another brand would be OK, as long as I can build up a good collection sharing batteries with it.

    Also have a Milwaukee M12 driver (which is excellent) and a couple of batteries so if the M12 brushless saw is amazing I would consider that too, but I feel like a reciprocating saw is probably something that’ll be better with more than 12 volts!

    Cheers,

    Danny

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Apr 2011
    Location
    se Melbourne
    Age
    62
    Posts
    2,567

    Default

    I have a Makita 18v DJR186. Does the job but it will drain the battery. (Two 3Ah batteries in about 90 minutes of stop start cutting.)
    I Have used it for demolishing a pergola, trimming/cutting down trees and cutting roots in the ground. Also cutting fire wood.

    Just as important as the tool is the blade. A sharp straight blade will make cutting easier.

  4. #3
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,756

    Default

    I have a Makita and use it "a lot".
    I got a Makita because I already have Makita 3 drill drivers and 4 batteries.
    At the mens shed I put a demolition TC blade on it and used it to cut through a 245mm diameter hole through two layers of Colorbond and 90 mm thick pine framing for the dust extractor trunk line.

    The other good use for it is in the garden. I won't use a chainsaw up a ladder but the reciprocating saw is fine.

  5. #4
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    1,357

    Default

    I have the 18v Makita one and it is far from gutless and would happily buy again. The Ryobi stuff is handyman gear so any of the other brands you mentioned will be far superior to it.

    Pick a brand that you can easily access at your local supplier, personally I would favour Makita, Milwaukee,Dewalt over the other brands purely because they are easy to come by, Makita probably being the easiest as all toolshops and the big green shed carry them.
    I have used the DeWalt gear and it is powerful but I find it uncomfortable to use whereas the Makita and Milwaukee gear seem more balanced and ergonomic but that is just a personal preference.

    I recently bought the 2x18v Makita chainsaw and it easily matches my little MS170 Stihl. Battery gear is very impressive these days

  6. #5
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    11,164

    Default

    I have the smaller Bosch Blue 18v which I've found quite good, even bought one to give to my son-in-law for his tool collection.....Cheers, crowie

  7. #6
    Join Date
    Jun 2003
    Location
    Brisbane, Qld
    Posts
    939

    Default

    Many thanks folks - sounds like so far everyone likes the ones they have tried, which is good news!

    If they're all pretty good I guess I will look at which battery system I want to buy into.

    I agree with Handyjack - a good sharp blade is vital with these things!

  8. #7
    Join Date
    Apr 2018
    Location
    Nsw
    Age
    64
    Posts
    1,357

    Default

    Quote Originally Posted by rtyuiop View Post
    Many thanks folks - sounds like so far everyone likes the ones they have tried, which is good news!

    If they're all pretty good I guess I will look at which battery system I want to buy into.

    I agree with Handyjack - a good sharp blade is vital with these things!
    I received an email last week from Makita with redemption specials of free items when you buy selected goods, google Makita Redemptions and you will see what is currently on offer, I assume the other brands do a similar thing so worth checking out.

    A couple of months ago Milwaukee was doing a deal where you could swap your Makita gear for the equivalent Milwaukee product. They are all keen to get you wedded to their system as it guarantees future sales.

  9. #8
    Join Date
    Feb 2012
    Location
    Rosslyn Park, Adelaide
    Posts
    182

    Default

    The Redemptions also provide a good avenue for Gumtree sales as many people either do not want the saw or already have one. I purchased a brand new Makita one from Gumtree, still in plastic wrap that was a redemption for less than 2/3 new price.

    This was the DRJ187 model which is Brushless, which has much better battery life than the earlier models.

    Bauldy

  10. #9
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,649

    Default

    +1 for the Makita 18v, paired with either Bosch blades (made in Suisse) or Lennox blades. For a cordless saw, it's a beast.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  11. #10
    Join Date
    Oct 2011
    Location
    Langwarrin
    Age
    43
    Posts
    952

    Default

    Quick tip on the blades.....

    For the past year I have purchased 2 carbide tipped blades.... They crap all over the standard jobs! Yes, they're about 25 - 35 bucks a pops but they cut sooooooo much quicker, they last a bloody long time and because they are sharper they don't need as much pressure so prolong the battery life and also gives you a better chance of cutting in a straight line where you wanted to cut (Saber saws - oh, you want to cut here....how about I cut 10mm off that line, I'll cut on an angle and run it outta whack for you)
    "All the gear and no idea"

  12. #11
    crowie's Avatar
    crowie is offline Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    11,164

    Default

    Quote Originally Posted by Gabriel View Post
    Quick tip on the blades.....

    For the past year I have purchased 2 carbide tipped blades.... They crap all over the standard jobs! Yes, they're about 25 - 35 bucks a pops but they cut sooooooo much quicker, they last a bloody long time and because they are sharper they don't need as much pressure so prolong the battery life and also gives you a better chance of cutting in a straight line where you wanted to cut (Saber saws - oh, you want to cut here....how about I cut 10mm off that line, I'll cut on an angle and run it outta whack for you)
    Any particulate brand please Gabriel??

  13. #12
    Join Date
    Aug 2016
    Location
    Adelaide
    Age
    67
    Posts
    57

    Default

    I have the Milwaukee 18volt great piece of kit . My son also uses Milwaukee as a trady comes in handy swapping skins .

  14. #13
    Join Date
    Oct 2011
    Location
    Langwarrin
    Age
    43
    Posts
    952

    Default

    Crowie, I have used both Lennox and Diablo. The Diablo laster a good 6 months of occasional use (on building sites) but taking precaution not to hit nails....

    The Lennox has been going for a couple if months now and still going strong
    "All the gear and no idea"

Similar Threads

  1. Useless AEG reciprocating saw?
    By NathanaelBC in forum HAND TOOLS - POWERED
    Replies: 14
    Last Post: 29th August 2016, 07:29 PM
  2. Is Reciprocating Saw Good for this job?
    By ~Ji in forum WOODWORK - GENERAL
    Replies: 3
    Last Post: 27th October 2015, 10:04 AM
  3. Reciprocating saw and meat
    By timbo123 in forum METALWORK FORUM
    Replies: 11
    Last Post: 7th February 2010, 02:13 PM
  4. Reciprocating vs Perpetual Turning
    By Gobae in forum WOODTURNING - GENERAL
    Replies: 5
    Last Post: 7th June 2006, 03:00 AM
  5. Reciprocating saws
    By burn in forum HAND TOOLS - POWERED
    Replies: 18
    Last Post: 3rd December 2003, 10:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •