Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Galaxy TSC-10?
-
26th February 2007, 01:29 AM #1Awaiting Email Confirmation
- Join Date
- Aug 2005
- Location
- Western Australia
- Posts
- 11
Galaxy TSC-10?
Hi all,
I have just bought a 2nd hand contractor saw made by Galaxy in Taiwan. Date of manufacture is 08/1990. Seems to be a good solid saw fitted with a motor manufactured in Australia by CMG which is at least 2HP (need to look harder at the plate). It has all the fruity bits like rack and pinion operation to till the blade rather than the table, and same to raise and lower. It has 2 mitre slots and 2 large grid cast wings as well as one of those natty fences that are micro adjustable and lock at both ends from the feed end of the table.
The only issue the saw has and the reason why I got it for just $150.00 is a flogged out alloy pulley on the main shaft, but having now pulled her down, all else seems in order. The pinions are good, no play anywhere, I am replacing the pulley and doing the bearings at the same time, so all should be as new by next weekend.
Anyhow, the point of my post is not so much to skite (but a bit of that to I guess cause it seems to be a pretty good pickup) but to ask if any of you guys and girls have heard of, or had experience with this model of saw or any other Galaxy products?? I seem to recall a rather robust drill press I used a while back that was a Galaxy but can't be sure. Anyhow any info would be appreciated.
Cheers
Kim
-
26th February 2007 01:29 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
9th April 2019, 02:47 PM #2SENIOR MEMBER
- Join Date
- Apr 2013
- Location
- Brisbane
- Posts
- 637
No. BUT I am looking for a saw and came across this: https://www.gumtree.com.au/s-ad/woom...saw/1214042995
-
9th April 2019, 04:15 PM #3Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
I think maybe after 12 years and zero posts this thread is dead?
-
9th April 2019, 08:25 PM #4
Similar Threads
-
TSC - 10SA Belt Size
By differential in forum HAND TOOLS - POWEREDReplies: 1Last Post: 30th January 2007, 05:07 PM -
Newbie with new TSC 10 table saw-Help
By clogger in forum TABLE SAWS & COMBINATIONSReplies: 8Last Post: 27th August 2006, 10:59 AM -
TSC 10 HB - free blade with WWW special?
By TassieKiwi in forum HAND TOOLS - POWEREDReplies: 2Last Post: 25th October 2005, 08:48 PM -
Moving Switch Box on TSC 12 HB
By PaulS in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 2Last Post: 7th August 2005, 10:33 PM -
New Toy! TSC 12HK Table saw
By Kiwibrucee in forum TABLE SAWS & COMBINATIONSReplies: 12Last Post: 9th March 2005, 12:23 AM