Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
15th February 2015, 10:03 PM #1New Member
- Join Date
- May 2014
- Location
- Sydney
- Posts
- 1
hex shank drill bits & driver bits
I'm after a decent range of hex shank drill bits & driver bits.
irwin make some decent driver bits, but their drill bits all seem to be imperial & I want metric bits.
festool appear to make some but they are $30 each!
any other decent options?
-
15th February 2015 10:03 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
15th February 2015, 10:19 PM #2Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
Bosch do hex shank drill bits, I've seen up to 6mm, don't know if they go larger or how much they cost.
As for driver bits, just buy one of the massive bit kits from the big green shed; I've managed to break a handful in 2 years of industrial use and they all come as at least 2 of a kind. You can go and spend $5-10 per bit for top of the line, but it's money poorly spent on what is, essentially, a semi-consumable item.
-
17th February 2015, 01:09 PM #3Senior Member
- Join Date
- Oct 2003
- Location
- Gold Coast,Australia
- Age
- 49
- Posts
- 350
i can vouch for the bosch bits, they make the standard and needlepoint bits. and both come in a kit of 6 bits. They are great, i use the needlepoints as they work well for melamine work.
dont get me started on driver bits, the Irwins are not worth talking about. Still trying to find a good quality brand.
-
17th February 2015, 01:35 PM #4SENIOR MEMBER
- Join Date
- May 2004
- Location
- Sth. Island, Oz.
- Age
- 64
- Posts
- 754
What you're using the bits for will determine their effectiveness. Bosch & many others make cheap hex drill bits in both conventional & dowel drill styles. Some even offer such niceties as titanium nitride coating. In my experience, however they are universally of inferior quality to the best parallel shanked bits: Dormer, Colt, Sutton et al. Cheap bits will always be..... Cheap. Given that smaller bits are essentially a disposable item, maybe it's an acceptable trade off; only you can answer that.
Realistically, the bosch spear point bits are fast & accurate in wood & synthetic substitutes. They just don't last. The shanks tend to be brittle, especially within the helix. The grade of HSS and the temper will determine the bit's resilience and flexibility.
I have also tried some of Trend's colleted bits with varying success. They have a conventional hex end, with (depending on the type) either a collet or grub screw to affix an interchangeable bit. In countersinking form these are excellent performers in wood, particularly when fitted with TCT countersink/counterbore cutters. I particularly like the ability to quickly & easily set the overall depth of cut by adjusting the bit in the holder, making a repeatable production type preset drill & countersink combo. For additional security I have often ground an elongated flat on the shank as a non-twist mating surface for the grub screw.
The colleted versions are not quite so good. The problem lies in the drii bit's parallel shank, where in larger sizes it will spin in the collet despite being tightened to extremes. The polished metal mating surfaces are just too smooth and well machined, unlike a drill chuck which has jaws with a 3 way "bite" on the drill's shank.
In summary then hex bits are at their best in wood & synthetics up to about 6mm or so. In metal or in larger sizes they are severely compromised in quality & performance.Sycophant to nobody!
Similar Threads
-
1/4" shank x 25mm+ cutting length straight bearing bits?
By d.m.s in forum ROUTING FORUMReplies: 7Last Post: 21st September 2014, 11:38 AM -
8mm and 6mm shank router bits
By KevinB in forum WOODWORK - GENERALReplies: 16Last Post: 1st April 2012, 04:24 PM -
Hex shank drill bits
By henlan77 in forum HAND TOOLS - POWEREDReplies: 0Last Post: 4th April 2008, 02:51 PM