Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 31
Thread: #@#*)^#@ jig saws
-
16th October 2019, 08:46 PM #1
#@#*)^#@ jig saws
Show me the idiot who created jigsaws and I'll not be responsible for my actions.
Have a 6month Ryobi and fair go it will not cut straight. fast-slow makes no difference, blade stays in the alignment wheel but just wonders below that cutting 6, 12 or 19mm ply.
give me a breakI would love to grow my own food, but I can not find bacon seeds
-
16th October 2019 08:46 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
16th October 2019, 08:59 PM #2
Tonyz
The jig saw is not my favourite tool. I have one and I would place it in the medium price bracket. It is a "blue" Bosch which today would weigh in at over $400 although I did not pay that almost twenty years ago. It is still limited in its capabilities, although I would expect it to easily cut the materials you have described. It has become apparent to me that there are big differences in blade quality too, although I have still got to get completely on top of this subject. Down at the budget end of the market (you have not said exactly which saw you have and whether corded or cordless) I can quite understand that you will be disappointed. I should also point out that there a machines a lot cheaper than a Ryobi.
You have my sympathies.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
-
16th October 2019, 09:02 PM #3
I’d be tempted to blame the blade rather than the tool; although I truly utterly despise Ryobi products a quality blade should track straight. My blades are all Bosch and Makita and I don’t have any issues.
Nothing succeeds like a budgie without a beak.
-
16th October 2019, 09:10 PM #4
Same as Chief,
I use my Makita from time to time it has know problem cutting 19mm.
You do need to “drive the saw”
Ie pushing the body a little left or right bit like driving a rear steer vehicle,if that makes sense.
I can’t comment on Roybi tools as I generally use Makita.
Cheers Matt
-
16th October 2019, 09:22 PM #5Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,470
My Makita is the worst jigsaw I’ve ever owned. I have a 40 year old Ryobi, which I can’t buy blades for anymore, that would leave it for dead.
-
16th October 2019, 09:48 PM #6
mine is basic cordless Ryobi 18v and I am using fine tooth blades.
I would love to grow my own food, but I can not find bacon seeds
-
16th October 2019, 10:03 PM #7Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
I suspect it might be a blade issue as well, I used to get pretty good results with Festool S 75/4 blades.
I did manage to get a hold of a couple of Hitachi branded carbide tipped blades years ago and they were soooooo good (not the carbide grit coated ones, actual carbide saw teeth), stuffed if I can find them again. Both Sutton and Bosch make them, can't seem to track down a local supplier though.
EDIT: Turns out Festool make them too...not cheap though Festool - Jigsaw Blade HM 75/4.5
-
17th October 2019, 01:38 AM #8China
- Join Date
- Dec 2005
- Location
- South Australia
- Posts
- 4,475
Ryobi ! say no more, not what they use to be
-
17th October 2019, 02:13 AM #9
Years ago I bought a GMC jiggy when select outlets were getting rid of stock for $20 a pop no matter what powered hand tool they were.
I swear that from day one the jiggy worked better as a lathe rather than anything else.
Cripes, I'd even prefer to try and floss my teeth with it than attempt cutting out a template within 470mm +ve on the pencil line.
Still...20 bucks is 20 bucks...
*miss my bandy*Every time you make a typo, the errorists win.
-
17th October 2019, 03:13 AM #10
I have a Makita 4300BV, which must be over 20 years old now. They don’t make them like this anymore - heavy and solid. I only use it for sawing ply for templates, but it works very well. The trick is to saw slowly and not stress the blade ... and use the correct blade for the task.
Regards from Perth
Derek
Visit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
17th October 2019, 07:15 AM #11
I used to have a cheep no-name brand which was horrible. When we were building our house it died. I then bought a barrel style Makita (the older version of the photo below), and it was night and day. Also, good sharp blades make a significant difference.
4351fct-001_888a9b9986147267a36a9e9270dcb292.jpg
It is worth remembering that it is by no means a precision tool. However I can and do reliably run it against a fence to break down panel stock too big for my table saw.
Kind regards,
Lance
-
17th October 2019, 02:48 PM #12GOLD MEMBER
- Join Date
- Mar 2015
- Location
- Melbourne, Vic, Australia
- Posts
- 1,255
Is the problem that the jigsaw is not tracking a line on the surface or that you are getting an angled cut from top to bottom? I found the latter is easy to do on thicker stock (40mm+) and I concentrate on only pushing forward on the saw and not putting in any lateral pressure as the blade will then deflect through the cut - it'll look like you are tracking the line from the top, but it won't be a square cut through the thickness of the stock. So no lateral force or movement, just pivoting and forward pressure if that makes sense - although I suspect that you are aware of that and your issue is with the blade drifting off the cut line on the surface?
I use bosch hss blades and find them to be fine.
Cheers, Dom
-
18th October 2019, 08:21 AM #13GOLD MEMBER
- Join Date
- Aug 2011
- Location
- bilpin
- Posts
- 3,559
Check the blade connection and shaft. The looser, the worse it will track. A smooth running, tight tolerance jigsaw is a pleasure. The loose as a goose, rattle like a child's toy variety have a mind of their own.
-
19th October 2019, 02:38 PM #14
-
19th October 2019, 07:49 PM #15SENIOR MEMBER
- Join Date
- May 2011
- Location
- Melbourne
- Posts
- 237
I use a $100 Makita jigsaw and hate it. I had the chance to try a Festool PS300 (Festool - PS 300 Barrel Grip Jigsaw) and it was a world of difference. Not sure if there's any models in between that would be just as good.
Similar Threads
-
GMC saws vs. Jepson saws
By craig.robinson in forum HAND TOOLS - POWEREDReplies: 7Last Post: 10th February 2020, 10:22 PM -
QUEENSLAND Hand-tools- Bad Axe Saws, Wenzloff Saws, Vesper, Kinshiro, Bridge City Tools HP-9
By kfinch in forum WOODWORK - Tools & MachineryReplies: 5Last Post: 17th April 2019, 11:18 PM -
Frames Saws/Bows Saws for re-sawing small boards 100mm deep
By Kate84TS in forum HAND TOOLS - UNPOWEREDReplies: 29Last Post: 15th April 2017, 03:15 PM -
Ian's Saws.
By Scribbly Gum in forum HAND TOOLS - UNPOWEREDReplies: 23Last Post: 18th December 2009, 08:55 AM -
Table Saws vs Radial Arm Saws
By RIMP in forum TABLE SAWS & COMBINATIONSReplies: 13Last Post: 14th March 2007, 05:22 PM