Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 21
-
17th December 2008, 09:09 PM #1
Lusting after a Festool guide rail saw but can't afford one?
was browsing Sydney Tools at Castle Hill today and came across a Makita guide rail saw
without doing a side-by-side direct comparison, the Mak guide rail looks the same dimensions as the Festool, same width, same profile, same splinter guard, same base plate on the saw.
Price was $850 for saw + two 1400 guide rails + other stuff
ian
usual disclaimer - no vested interest
-
17th December 2008 09:09 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
17th December 2008, 10:13 PM #21 legged lumberjack
- Join Date
- Oct 2008
- Location
- Melbourne
- Posts
- 156
heres a link for it but only seems to be in this package
-
19th March 2009, 08:43 PM #3Senior Member
- Join Date
- Mar 2008
- Location
- Australia
- Posts
- 141
But the Festool kit isn't a whole lot dearer. I got mine or $847 last year with 1 guide rail and systainer. They have gone up a bit since. Is an amazing bit of gear that can deliver a planer-like-finish edge on a cut. The combination of a straight cut and measured depth is priceless.
On a real budget, you can get aftermarket guide/base like these from Carba-tec:
http://www.carbatec.com.au/clamps-vi...ogrip-saw-base
-
20th March 2009, 01:36 PM #4
But I got a different result on the Sydney Tools website for guide rail saws.
http://www.sydneytools.com.au/shopdi...ail+Track+Saws
* 165mm Makita SP6000K $680.
* 160mm Festool TS55EQBFS $896.50
Both seem rather high prices for 6.5 inch saws plus a guide.
Cheers
Graeme
-
21st March 2009, 08:16 AM #5
If money is tight (isn't always?) perhaps a viable alternative is the pro-grip system. See the link below. Does anyone have any direct experience of using this product?
http://www.carbatec.com.au/clamps-vi...progrip-fences
-
26th March 2009, 02:58 PM #6Senior Member
- Join Date
- Mar 2008
- Location
- Australia
- Posts
- 141
Yes they are pricey. And they are near identical in design, so much so I wondered if Makita had bough festool, but didn't manage to find any information.
Note the lower prices above are for saw with guide rails, but less other bits. The price in the first post is a fuller kit.
The key is that the guide allows the saw to track absolutely straight with near zero play, leaving a planer-like finish on the cut edges. Having used a "normal" circular saw, there is no comparison.
FWIW, Makita doesn't have the same range of tracks/guides as Festool, which also include router guides and 32mm hole spacing guides for cabinet shelves.
-
26th March 2009, 07:57 PM #7SENIOR MEMBER
- Join Date
- Oct 2008
- Location
- Gold Coast
- Age
- 49
- Posts
- 591
festool first brought out the saw and guide rail in 1964, thats 45 years ago.
there are only 3 design changes in those 45 years.
i had the earlier ATF 55 and it had a few things that were not perfect, such as changing the blade, it used to be a bugger. and the riving knife was not spring loaded, i always wondered why they called it a plunge cutting saw, i tried this a few times, it scared the hell out of me when the saw would kick back and leave skid marks on the very expensive aluminium guide rails.
i now have the festool TS-55, in my eyes, it is as close to perfection as you can get, i am sure it will be 10 years or more before they change the design again.
dont get me wrong, i love makita too, i swear by their dropsaws, planers, cordless and electric drills.
but i think they will have a few design changes to their track saw, before i would could call it perfect. and when i spend close to $1000, i demand perfection.
maybe if it was half the price of the festool range i would have bought it, but it was way too close to the rolls royce of power tools-festool.
i am no expert in marketing or advertising but i reckon every chippie would buy the makita for the right price, but thats the problem for me, its just too expensive.
anyway, thats enough tool bashing/worshipping for one night, tomorrows a bright, brand new day!
cheers, justin.
-
26th March 2009, 08:24 PM #8Senior Member
- Join Date
- Mar 2008
- Location
- Australia
- Posts
- 141
I think they could do a bit better still ergonomically....since I expected these issues to be not there:
1. engineer gears without the growl
2. additional depth marker for when using on the guide rail
3. include the optional grub screw for precision depth setting
4. a family of blades with identical kerfs that will go with same splinterguard strip (I get that using Freud blades)
Plus miscellaneous little things - higher quality castings without rough edges; larger machine threaded adjustment screws rather than self tappers landing on aluminium; higher precision in hinge mechanism, etc
-
26th March 2009, 10:04 PM #9the tool specialists
- Join Date
- Jul 2007
- Location
- Smithfield,NSW
- Posts
- 365
we just go stock of the makita plunge cut saws today, and all the workers were keen to pick out the differences to the festool after spending $50k of our advertising budget & an extra 40sq meters of showroom space to upgrade from festool shop to festool premium shop.
apart from the above the main items they managed to pick out was:
1. variable speed adjuster seemed very tight
2. no riving knife
3. the base thickness
4. tanos systainer case (festool owned company)
5. 3year warranty of the festool compared to the 1 year of the makita
we decided that it does have a market for the carpeneter that just wants a priced position plunge cut saw, by the time you add the guide rail & with makita's price increase we think that alot of the customers will still buy the festool over the makita
cheers
Team VEK TOOLS
www.vektools.com.au
-
26th March 2009, 10:13 PM #10SENIOR MEMBER
- Join Date
- Oct 2008
- Location
- Gold Coast
- Age
- 49
- Posts
- 591
you are right blouis79, i forgot about the depth marker while using the rail. thats a pita when cutting timber, its impossible to use the saw without the rail, i dont understand why the depth gauge is marked out the way it is.
the growl you spoke of, is not the gearing, i believe its the MMC electronics controlling the motor. i get the same growl when i kickstart my kapex droppy.
i have read on the FOG website that the electronics are constantly adjusting the power under load, which saves the motor in the long term. i am not an electrician, so dont take my word as gospel truth.
i was not aware of the other issues you have brought up, but i will check them out tomorrow morning.
hopefully, festool keep up to date with these forums and take on board what you have said.
-
26th March 2009, 10:38 PM #11Senior Member
- Join Date
- Mar 2008
- Location
- Australia
- Posts
- 141
I'm fairly sure the growl is gear backlash which is why it goes away under any sort of load. There is a lot of gear backlash. It's easy to test the noise with/without blade and load.
I started making an aluminium add-on pointer to correct for depth. I had seen a plastic one on a Festool forum, where I had mentioned the little design deficiencies.
-
2nd April 2009, 01:04 PM #12Awaiting Email Confirmation
- Join Date
- Sep 2005
- Location
- Sydney Australia
- Posts
- 62
Saw tracking device
Firstly I have not used the Festool or Makita but both appear overpriced. <?xml:namespace prefix = o ns = "urn:schemas-microsoft-comfficeffice" /><o></o>
I typed in track saw guides through Google and two I found interesting was the EZ saw guide and the Penn State Industries (PSI) panel saw guide. <o></o>
The EZ saw guide has a Utube video showing its merits and is impressive at around $260 to $330 Aust. delivered to door. (Prices depend on length of track, rough dollar conversions, freight guesses ex <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-comffice:smarttags" /><st1:country-region w:st="on"><st1lace w:st="on">USA</st1lace></st1:country-region>. So the prices are probably on the high side.) <o></o>
The PSI panel saw guide is about $250 delivered Aust. The PSI accuracy is listed as 1/16 out over 9 feet or 1/16 inch out over 108 inches. About 1 1/2 mm out in 2meters. Which is fine for my amateur usuage. Both will accept cordless 6 1/2 inch saws or normal corded saws up to 8 1/2 inch. Both appear simple, easy to use and quick to set up. I am going for the cheaper one.
EZ you tube demo.
[ame="http://www.youtube.com/watch?v=vrrjLYn-6WY"]YouTube - The EZ Clamping System[/ame]
-
2nd April 2009, 11:47 PM #13
-
3rd April 2009, 10:35 AM #14SENIOR MEMBER
- Join Date
- Oct 2008
- Location
- Gold Coast
- Age
- 49
- Posts
- 591
i agree with honorary bloke, 1/16 is way too much for me.
1/16 inch= 1.5875mm
1.5mm out over 9 feet is not even close to precise!
a standard sheet size is 8 x 4 or (2400mm x 1200mm).
i cant imagine losing 1.5mm while ripping sheets.
horses for courses as the man said, btw, my festool paid for itself in 1 day, installing a kitchen and hanging doors. it is expensive, but it saves me money everytime i take it out of the box.
cheers, justin.
-
3rd April 2009, 10:45 AM #15
I'm with "The Bloke" as well. I have a TS75 and I reckon it's paid for itself several times. Accuracy is all.
Regards,
Rob
Similar Threads
-
guide rail
By Sokolic in forum FESTOOL FORUMReplies: 9Last Post: 15th September 2007, 12:36 AM -
Can't afford my BP-16A
By arose62 in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 13Last Post: 24th November 2006, 09:09 PM -
Could only afford small bits.
By powderpost in forum WOODTURNING - GENERALReplies: 15Last Post: 17th July 2006, 06:46 PM -
Can't Afford the Triton Cordless Plunge Drill? Try GMC.
By barrysumpter in forum HAND TOOLS - POWEREDReplies: 5Last Post: 3rd April 2005, 04:12 AM -
Simple mortice jig using Festool guide rail
By chris_hewett in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 7Last Post: 12th February 2005, 04:14 AM